Bonini, Lorenzo
Preferred name
Bonini, Lorenzo
Official Name
Lorenzo Bonini
ORCID
16 results
Filters
Settings
The search returned 16 results
Now showing 1 - 10 of 16
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Buried Alive: Imaging the 9 November 2022, Mw 5.5 Earthquake Source on the Offshore Adriatic Blind Thrust Front of the Northern Apennines (Italy)
The prompt identification of faults responsible for moderate-to-large earthquakes is fundamental for understanding the likelihood of further, potentially damaging events. This is increasingly challenging when the activated fault is an offshore buried thrust, where neither coseismic surface ruptures nor GPS/InSAR deformation data are available after an earthquake. We show that on 9 November 2022, an Mw 5.5 earthquake offshore Pesaro ruptured a portion of the buried Northern Apennines thrust front (the Cornelia thrust system [CTS]). By post-processing and interpreting the seismic reflection profiles crossing this thrust system, we determined that the activated fault (CTS) is an arcuate 30-km-long, NW-SE striking, SW dipping thrust and that older structures at its footwall possibly influenced its position and geometry. The activation of adjacent segments of the thrust system is a plausible scenario that deserves to be further investigated to understand the full earthquake potential of this offshore seismogenic source.635 273 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , How do inherited dip-slip faults affect the development of new extensional faults? Insights from wet clay analog models
The development of structurally controlled basins is frequently dominated by inherited geological and tectonic structures, especially when the affected region has undergone multiple tectonic phases. In this study we use physically scaled analog models to analyze the impact of inherited faults on the evolution of a new extensional fault system and its associated basin. In our experiments, we introduced inherited faults – bearing diverse geometries and orientations – cut through a homogeneous analog material (wet clay). After each experiment, we compare (a) how the inherited faults affected the inception and development of new faults and (b) the shape of the resulting basins, using a ‘reference model’ run without pre-existing faults. The results show that the orientation of pre-existing faults with respect to the extensional axis does affect the development of the new extensional structures. The main effects show up when the orientation of the pre-existing faults is closer to that expected for a fault that is optimally oriented (perpendicular) with respect to the direction of extension and has a dip close to an Andersonian extensional fault. Conversely, the impact on the resulting basin shape is more spatially complex, especially in the case of misoriented pre-existing faults. We also compare our experimental results with an analytical method based on the slip tendency theory. The application of our findings to selected natural cases demonstrates how one may interpret the occurrence, orientation, and activity of inherited faults by looking at the present-day geometry and wavelength of an extensional basin, particularly when newly formed extensional faults exhibit structurally unexpected trajectories.431 92 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Present-Day Surface Deformation in North-East Italy Using InSAR and GNSS Data
Geodetic data can detect and estimate deformation signals and rates due to natural and anthropogenic phenomena. In the present study, we focus on northeastern Italy, an area characterized by ~1.5–3 mm/yr of convergence rates due to the collision of Adria-Eurasia plates and active subsidence along the coasts. To define the rates and trends of tectonic and subsidence signals, we use a Multi-Temporal InSAR (MT-InSAR) approach called the Stanford Method for Persistent Scatterers (StaMPS), which is based on the detection of coherent and temporally stable pixels in a stack of single-master differential interferograms. We use Sentinel-1 SAR images along ascending and descending orbits spanning the 2015–2019 temporal interval as inputs for Persistent Scatterers InSAR (PSI) processing. We apply spatial-temporal filters and post-processing steps to reduce unrealistic results. Finally, we calibrate InSAR measurements using GNSS velocities derived from permanent stations available in the study area. Our results consist of mean ground velocity maps showing the displacement rates along the radar Line-Of-Sight for each satellite track, from which we estimate the east–west and vertical velocity components. Our results provide a detailed and original view of active vertical and horizontal displacement rates over the whole region, allowing the detection of spatial velocity gradients, which are particularly relevant to a better understanding of the seismogenic potential of the area. As regards the subsidence along the coasts, our measurements confirm the correlation between subsidence and the geological setting of the study area, with rates of ~2–4 mm/yr between the Venezia and Marano lagoons, and lower than 1 mm/yr near Grado.72 96 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Progetto RETRACE-3D - centRal italy EarThquakes integRAted Crustal modEl - Rapporto Finale
(2021-03-29) ;RETRACE-3D, Working Group; ; ; Il progetto RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) è volto alla caratterizzazione tridimensionale, geologica e sismotettonica, del volume di crosta terrestre che a partire dal 24 agosto 2016 è stato interessato dai terremoti di Amatrice, Visso e Norcia, e dalla relativa sequenza sismica. Il progetto è il risultato di una collaborazione tra il Dipartimento della Protezione Civile, l’Istituto Nazionale di Geofisica e Vulcanologia (INGV), il Consiglio Nazionale delle Ricerche che partecipa con l’Istituto di Geologia Ambientale e Geoingegneria (CNR-IGAG) e l’Istituto per il Rilevamento Elettromagnetico dell’Ambiente (CNR-IREA) e l’Istituto Superiore per la Protezione e la Ricerca Ambientale (ISPRA), con la collaborazione di Eni e Total, realtà private ma anch’esse parte del Servizio nazionale della Protezione Civile, che hanno messo a disposizione i propri dati di sottosuolo.171 128 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Progetto RETRACE-3D - centRal italy EarThquakes integRAted Crustal modEl - Modello Geologico
(2021-03-29) ;RETRACE-3D, Working Group; ; ; Three-dimensional geological model of the area of the central Apennines affected by the 2016-2018 seismic sequence. The model consists of stratigraphic surfaces (top or basal unconformity of units, or sequences of units, with homogeneous behavior) and main faults of the area. The stratigraphic surfaces are, from the oldest to the most recent: the top of pre-Upper Triassic units, the top of the intra-Triassic units, the top of Calcare Massiccio, the top of the Marne157 97 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , RETRACE-3D project: a multidisciplinary collaboration to build a crustal model for the 2016-2018 central Italy seismic sequence
The RETRACE-3D project (centRal italy EarThquakes integRAted Crustal model) focused on the revision of all the available geological and geophysical data in the area interested by the 2016-2018 seismic sequence of central Italy, with the final aim to reconstruct a reliable and consistent 3D geological model of that area. It is based on a collaboration, which was framed into a formal agreement, between Dipartimento della Protezione Civile (the Italian Civil Protection Department), Istituto di Geologia Ambientale e Geoingegneria, and Istituto per il Rilevamento Elettromagnetico of the Consiglio Nazionale delle Ricerche, Istituto Nazionale di Geofisica e Vulcanologia, and Istituto Superiore per la Protezione e la Ricerca Ambientale. The agreement purpose was to develop a project aimed at the geological and seismotectonic characterisation of the crustal volume hosting that seismic sequence. We present and discuss the approach, methodology and results of the project. The 3D geological model of the study area is developed in detail down to a depth of about 12 km, and extended to the Moho based on available regional-scale information. The model is available on the RETRACE-3D project website (www.retrace3d.it).3102 360 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Testing different tectonic models for the source of the Mw 6.5, 30 October 2016, Norcia earthquake (central Italy): A youthful normal fault, or negative inversion of an old thrust?
We adopted a multidisciplinary approach to investigate the seismotectonic scenario of the 30 October 2016, Mw 6.5, Norcia earthquake, the largest shock of the 2016-2017 central Italy earthquake sequence. First, we used seismological and geodetic data to infer the dip of the main slip patch of the seismogenic fault, that turned out to be rather low-angle (37°). To evaluate whether this is an acceptable dip for the main seismogenic source, we modeled earthquake deformation using single- and multiple-fault models deduced from aftershock pattern analyses. These models show that the coseismic deformation generated by the Norcia earthquake is coherent with slip along a rather shallow-dipping plane. To understand the geological significance of this solution we reconstructed the sub-surface architecture of the epicentral area. As the available data are not robust enough to converge on a single fault model, we built three different models encompassing all major geological evidence and the associated uncertainties, including the tectonic style and the location of major decollement levels. In all models the structures derived from the contractional phase play a significant role: from controlling segmentation to partially reusing inherited faults, to fully reactivating in extension a regional thrust, geometrically compatible with the source of the Norcia earthquake. Based on our conclusions, some additional seismogenic sources falling in the eastern, external portions of the Apennines may coincide with inherited structures. A circumstance that may be a common occurrence in this region of the chain, where the inception of extension is as recent as Middle-Upper Pleistocene.1954 269 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , RETRACE-3D PROJECT, a multidisciplinary approach for the construction of a 3D crustal model: first results and seismotectonic implications
(2018-11); ; ; ; The RETRACE-3D (centRal italy EarThquakes integRAted Crustal modEl) Project has been launched with the ambitious goal to build, as first result, a new, robust, 3D geological model of broad consensus of the area struck by the 2016-2018 Central Italy seismic sequence170 106 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Structural analysis and Miocene-to-Present tectonic evolution of a lithospheric-scale, transcurrent lineament: The Sciacca Fault (Sicilian Channel, Central Mediterranean Sea)
Seismo-stratigraphic and structural analysis of a large number of multichannel seismic reflection profiles acquired in the northern part of the Sicilian Channel allowed a 3-D reconstruction of a regional NS-trending transfer zone which displays a transcurrent tectonic regime, and that is of broad relevance for its seismotectonic and geodynamic implications. It is constituted of two major transcurrent faults delimiting a 30-km-wide, mostly undeformed basin. The western fault (Capo Granitola) does not show clear evidence of present-day tectonic activity, and toward the south it is connected with the volcanic area of the Graham Bank. The eastern fault (Sciacca) is structurally more complex, showing active deformation at the sea-floor, particularly evident along the Nerita Bank. The Sciacca Fault is constituted of a master and splay faults compatible with a right-lateral kinematics. Sciacca Fault is superimposed on an inherited weakness zone (a Mesozoic carbonate ramp), which borders to the east a 2.5-km-thick Plio-Quaternary basin, and that was reactivated during the Pliocene. A set of scaled claybox analogue models was carried out in order to better understand the tectonic processes that led to the structural setting displayed by seismic data. Tectonic structures and uplift/subsidence patterns generated by the models are compatible with the 3-D model obtained from seismic reflection profiles. The best fit between the tectonic setting deriving from the interpretation of seismic profiles and the analogue models was obtained considering a right-lateral movement for the Sciacca Fault. Nevertheless, the stress field in the study area derived from GPS measurements does not support the present-day modelled right-lateral kinematics along the Sciacca Fault. Moreover, seismic events along this fault show focal mechanisms with a left-lateral component. We ascribe the slip change along the Sciacca Fault, from a right-lateral transcurrent regime to the present-day left-lateral kinematics to a change of principal horizontal stress direction starting from Late Pliocene.66 1 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , How do horizontal, frictional discontinuities affect reverse fault-propagation folding?
The development of new reverse faults and related folds is strongly controlled by the mechanical characteristics of the host rocks. In this study we analyze the impact of a specific kind of anisotropy, i.e. thin mechanical and frictional discontinuities, in affecting the development of reverse faults and of the associated folds using physical scaled models. We perform analog modeling introducing one or two initially horizontal, thin discontinuities above an initially blind fault dipping at 30° in one case, and 45° in another, and then compare the results with those obtained from a fully isotropic model. The experimental results show that the occurrence of thin discontinuities affects both the development and the propagation of new faults and the shape of the associated folds. New faults 1) accelerate or decelerate their propagation depending on the location of the tips with respect to the discontinuities, 2) cross the discontinuities at a characteristic angle (∼90°), and 3) produce folds with different shapes, resulting not only from the dip of the new faults but also from their non-linear propagation history. Our results may have direct impact on future kinematic models, especially those aimed to reconstruct the tectonic history of faults that developed in layered rocks or in regions affected by pre-existing faults.279 98
