Skip to main content
The search returned 12 results
Now showing 1 - 10 of 12
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A Multi-Sensor Approach for Volcanic Ash Cloud Retrieval and Eruption Characterization: The 23 November 2013 Etna Lava Fountain

    Volcanic activity is observed worldwide with a variety of ground and space-based remote sensing instruments, each with advantages and drawbacks. No single system can give a comprehensive description of eruptive activity, and so, a multi-sensor approach is required. This work integrates infrared and microwave volcanic ash retrievals obtained from the geostationary Meteosat Second Generation (MSG)-Spinning Enhanced Visible and Infrared Imager (SEVIRI), the polar-orbiting Aqua-MODIS and ground-based weather radar. The expected outcomes are improvements in satellite volcanic ash cloud retrieval (altitude, mass, aerosol optical depth and effective radius), the generation of new satellite products (ash concentration and particle number density in the thermal infrared) and better characterization of volcanic eruptions (plume altitude, total ash mass erupted and particle number density from thermal infrared to microwave). This approach is the core of the multi-platform volcanic ash cloud estimation procedure being developed within the European FP7-APhoRISM project. The Mt. Etna (Sicily, Italy) volcano lava fountaining event of 23 November 2013 was considered as a test case. The results of the integration show the presence of two volcanic cloud layers at different altitudes. The improvement of the volcanic ash cloud altitude leads to a mean difference between the SEVIRI ash mass estimations, before and after the integration, of about the 30%. Moreover, the percentage of the airborne “fine” ash retrieved from the satellite is estimated to be about 1%–2% of the total ash emitted during the eruption. Finally, all of the estimated parameters (volcanic ash cloud altitude, thickness and total mass) were also validated with ground-based visible camera measurements, HYSPLIT forward trajectories, Infrared Atmospheric Sounding Interferometer (IASI) satellite data and tephra deposits.
      376  8
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Stereoscopic Estimation of Volcanic Ash Cloud-Top Height from Two Geostationary Satellites

    The characterization of volcanic ash clouds released into the atmosphere during explosive eruptions includes cloud height as a fundamental physical parameter. A novel application is proposed of a method based on parallax data acquired from two geostationary instruments for estimating ash cloud-top height (ACTH). An improved version of the method with a detailed discussion of height retrieval accuracy was applied to estimate ACTH from two datasets acquired by two satellites in favorable positions to fully exploit the parallax effect. A combination of MSG SEVIRI (HRV band; 1000 m nadir spatial resolution, 5 min temporal resolution) and Meteosat-7 MVIRI (VIS band, 2500 m nadir spatial resolution, 30 min temporal resolution) was implemented. Since MVIRI does not acquire data at exactly the same time as SEVIRI, a correction procedure enables compensation for wind advection in the atmosphere. The method was applied to the Mt. Etna, Sicily, Italy, eruption of 23 November 2013. The height of the volcanic cloud was tracked with a top height of ~8.5 km. The ash cloud estimate was applied to the visible channels to show the potential accuracy that will soon be achievable also in the infrared range using the next generation of multispectral imagers. The new constellation of geostationary meteorological satellites will enable full exploitation of this technique for continuous global ACTH monitoring.
      169  175
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Mt. Etna tropospheric ash retrieval and sensitivity analysis using Moderate Resolution Imaging Spectroradiometer measurements

    A retrieval of tropospheric volcanic ash from Mt Etna has been carried out, using measurements from the Moderate Resolution Imaging Spectroradiometer (MODIS). The NASA-MODIS satellite instrument acquires images in the 0.4 to 14 μm spectral range with a spatial resolution of 1 km at nadir. The eruption which occurred on 24 November 2006 is considered as a test case in this work. In order to derive the ash plume optical thickness, the particle effective radius and the total mass, the Brightness Temperature Difference procedure has been applied to MODIS channels 31 (centered at 11 μm) and 32 (centered at 12 μm). Channel 5 (centered at 1.24 μm) has been used to refine the cloud discrimination, exploiting the distinct reflectivity of meteorological and volcanic clouds in the near infrared spectral range. The detection of volcanic ash pixels has been significantly improved by applying an atmospheric water vapor correction to MODIS data. This procedure doubles the number of pixels identified as containing volcanic ash compared to the original method. The retrieved mean ash optical thickness at 0.55 μm, mean particle effective radius and the total ash mass in the plume are 0.4, 3.5 μm and 3620 tons, respectively. A detailed sensitivity analysis has been carried out to investigate errors in the retrieval caused by the uncertainty in various parameters: surface temperature and emissivity, plume geometry (altitude and thickness), ash type and atmospheric water vapor. Results show that the largest contributions to retrieval errors are from uncertainty in surface parameters, aerosol type and atmospheric water vapor. The total tropospheric volcanic ash retrieval errors are estimated to be 30%, 30% and 40% for mean AOT, mean effective radius and total mass retrieval, respectively.
      488  33
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Simultaneous retrieval of volcanic sulphur dioxide and plume height from hyperspectral data using artificial neural networks

    Artificial neural networks (ANNs) are a valuable and well-established inversion technique for the estimation of geophysical parameters from satellite images; once trained, they help generate very fast results. Furthermore, satellite remote sensing is a very effective and safe way to monitor volcanic eruptions in order to safeguard the environment and the people affected by those natural hazards. This paper describes an application of ANNs as an inverse model for the simultaneous estimation of columnar content and height of sulphur dioxide (SO2) plumes from volcanic eruptions using hyperspectral data from remote sensing. In this study two ANNs were implemented in order to emulate a retrieval model and to estimate the SO2 columnar content and plume height. ANNs were trained using all infrared atmospheric sounding interferometer (IASI) channels between 1000–1200 and 1300–1410 cm−1 as inputs, and the corresponding values of SO2 content and height of plume, obtained from the same IASI channels using the SO2 retrieval scheme by Carboni et al., as target outputs. The retrieval is demonstrated for the eruption of the Eyjafjallajökull volcano (Iceland) for the months of 2010 April and May and for the Grimsvotn eruption during 2011 May. Both neural networks were trained with a time series consisting of 58 hyperspectral eruption images collected between 2010 April 14 and May 14 and 16 images from 2011 May 22 to 26, and were validated on three independent data sets of images of the Eyjafjallajökull eruption, one in April and the other two in May, and on three independent data sets of the Grímsvötn volcanic eruption that occurred in 2011 May. The root mean square error (RMSE) values between neural network outputs and targets were lower than 20 Dobson units (DU) for SO2 total column and 200 millibar (mb) for plume height. The RMSE was lower than the standard deviation of targets for the Grímsvötn eruption. The neural network had a lower retrieval accuracy when the target value was outside the values used during the training phase
      83  134
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Volcanic SO2 by UV-TIR satellite retrievals: validation by using ground-based network at Mt. Etna

    Mt. Etna volcano in Italy is one of the most active degassing volcanoes worldwide, emitting a mean of 1.7 Mt/year of Sulphur Dioxide (SO2) in quiescent periods. In this work, SO2 measurements retrieved by Moderate Resolution Imaging Spectroradiometer (MODIS), hyper-spectral Infrared Atmospheric Sounding Interferometer (IASI) and the second Global Ozone Monitoring Experiment (GOME-2) data are compared with the ground-based data from the FLux Automatic MEasurement monitoring network (FLAME). Among the eighteen lava fountain episodes occurring at Mt. Etna in 2011, the 10 April paroxysmal event has been selected as a case-study for the simultaneous observation of the SO2 cloud by satellite and ground-based sensors. For each data-set two retrieval techniques were adopted and the measurements of SO2 mass and flux with their respective uncertainty were obtained. With respect to the FLAME SO2 mass of 4.5 Gg, MODIS, IASI and GOME-2 differ by about 10%, 15% and 30%, respectively. The SO2 flux correlation coefficient between MODIS and FLAME is 0.84. All the retrievals within the respective errors are in agreement with the ground-based measurements supporting the validity of these space measurements.
      448  236
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A Neural Network Algorithm to Detect Sulphur Dioxide Using IASI Measurements

    The remote sensing of volcanic sulphur dioxide (SO2) is important because it is used as a proxy for volcanic ash, which is dangerous to aviation and is generally more difficult to discriminate. This paper presents an Artificial Neural Network (ANN) algorithm that recognizes volcanic SO2 in the atmosphere using hyperspectral remotely sensed data from the IASI instrument aboard the Metop-A satellite. The importance of this approach lies in exploiting all thermal infrared spectral information of IASI and its application to near real-time volcanic monitoring in a fast manner. In this paper, the ANN algorithm is demonstrated on data of the Eyjafjallajökull volcanic eruption (Iceland) during the months of April and May 2010, and on the Grímsvötn eruption occurring during May 2011. The algorithm consists of a two output neural network classifier trained with a time series consisting of some hyperspectral eruption datasets collected during 14 April to 14 May 2010 and a few from 22 to 26 May 2011. The inputs were all channels (441) in the IASI v3 band and the target outputs (truth) were the corresponding retrievals of SO2 amount obtained with an optimal estimation method. The validation results for the Eyjafjallajökull independent data-sets had an overall accuracy of 100% and no commission errors, therefore demonstrating the feasibility of estimating the presence of SO2 using a neural network approach also a in cloudy sky conditions. Although the validation of the neural network classifier on datasets from the Grímsvötn eruption had no commission errors, the overall accuracies were lower due to the presence of omission errors. Statistical analysis revealed that those false negatives lie near the detection threshold for discriminating pixels affected by SO2. This demonstrated that the accuracy in classification is strictly related to the sensitivity of the model. The lower accuracy obtained in detecting SO2 for Grímsvötn validation dates might also be caused by less statistical knowledge of such an eruption during the training phase.
      111  97
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Intercomparison of Metop-A SO2 measurements during the 2010- 2011 Icelandic eruptions

    The European Space Agency project Satellite Monitoring of Ash and Sulphur Dioxide for the mitigation of Aviation Hazards, was introduced after the eruption of the Icelandic volcano Eyjafjallajökull in the spring of 2010 to facilitate the development of an optimal EndtoEnd System for Volcanic Ash Plume Monitoring and Prediction. The Eyjafjallajökull plume drifted towards Europe and caused major disruptions of European air traffic for several weeks affecting the everyday life of millions of people. The limitations in volcanic plume monitoring and prediction capabilities gave birth to this observational system which is based on comprehensive satellitederived ash plume and sulphur dioxide [SO2] level estimates, as well as a widespread validation using supplementary satellite, aircraft and groundbased measurements. Intercomparison of the volcanic total SO2 column and plume height observed by GOME2/ MetopA and IASI/MetopA are shown before, during and after the Eyjafjallajökull 2010 eruptions as well as for the 2011 Grímsvötn eruption. Colocated groundbased Brewer Spectrophotometer data extracted from the World Ozone and Ultraviolet Radiation Data Centre for de Bilt, the Netherlands, are also compared to the different satellite estimates. Promising agreement is found for the two different types of instrument for the SO2 columns with linear regression coefficients ranging around from 0.64 when comparing the different instruments and 0.85 when comparing the two different IASI algorithms. The agreement for the plume height is lower, possibly due to the major differences between the height retrieval part of the GOME2 and IASI algorithms. The comparisons with the Brewer groundbased station in de Bilt, The Netherlands show good qualitative agreement for the peak of the event however stronger eruptive signals are required for a longer quantitative comparison.
      294  238
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Quantitative Retrieval of Volcanic Sulphate Aerosols from IASI Observations

    We developed a new retrieval algorithm based on the Infrared Atmospheric Sounding Interferometer (IASI) observations, called AEROIASI-H2SO4, to measure the extinction and mass concentration of sulphate aerosols (binary solution droplets of sulphuric acid and water), with moderate random uncertainties (typically 35% total uncertainty for column mass concentration estimations). The algorithm is based on a self-adapting Tikhonov–Phillips regularization method. It is here tested over a moderate-intensity eruption of Mount Etna volcano (18 March 2012), Italy, and is used to characterise this event in terms of the spatial distribution of the retrieved plume. Comparisons with simultaneous and independent aerosol optical depth observations from MODIS (Moderate Resolution Imaging Spectroradiometer), SO2 plume observations from IASI and simulations with the CHIMERE chemistry/transport model show that AEROIASI-H2SO4 correctly identifies the volcanic plume horizontal morphology, thus providing crucial new information towards the study of volcanic emissions, volcanic sulphur cycle in the atmosphere, plume evolution processes, and their impacts. Insights are given on the possible spectroscopic evidence of the presence in the plume of larger-sized particles than previously reported for secondary sulphate aerosols from volcanic eruptions.
      166  97
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Volcanic Cloud Top Height Estimation Using the Plume Elevation Model Procedure Applied to Orthorectified Landsat 8 Data. Test Case: 26 October 2013 Mt. Etna Eruption

    In this study, we present a method for extracting the volcanic cloud top height (VCTH) as a plume elevation model (PEM) from orthorectified Landsat 8 data (Level 1). A similar methodology was previously applied to raw Landsat-8 data (Level 0). But level 0 data are not the standard product provided by the National Aeronautics and Space Administration (NASA)/United States Geological Survey (USGS). Level 0 data are available only on demand and consist on 14 data stripes multiplied by the number of multispectral bands. The standard product for Landsat 8 is the ortho image, available free of charge for end-users. Therefore, there is the need to adapt our previous methodology to Level 1 Landsat data. The advantages of using the standard Landsat products instead of raw data mainly include the fast -ready to use- availability of the data and free access to registered users, which is of major importance during volcanic crises. In this study, we adapt the PEM methodology to the standard Landsat-8 products, with the aim of simplifying the procedure for routine monitoring, offering an opportunity to produce PEM maps. In this study, we present the method. Our approach is applied to the 26 October 2013 Mt. Etna episodes comparing results independent VCTH measures from the spinning enhanced visible and infrared imager (SEVIRI) and the moderate resolution imaging spectroradiometer (MODIS).
      395  60
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    New strategies for vertical transport in chemistry transport models: application to the case of the Mount Etna eruption on 18 March 2012 with CHIMERE v2017r4

    Excessive numerical diffusion is one of the major limitations in the representation of long-range transport by chemistry transport models. In the present study, we focus on excessive diffusion in the vertical direction, which has been shown to be a major issue, and we explore three possible ways of addressing this problem: increasing the vertical resolution, using an advection scheme with anti-diffusive properties and more accurately representing the vertical wind. This study was carried out using the CHIMERE chemistry transport model for the 18 March 2012 eruption of Mount Etna, which released about 3 kt of sulfur dioxide into the atmosphere in a plume that was observed by satellite instruments (the Infrared Atmospheric Sounding Interferometer instrument, IASI, and the Ozone Monitoring Instrument, OMI) for several days. The change from the classical Van Leer (1977) scheme to the Després and Lagoutière (1999) anti-diffusive scheme in the vertical direction was shown to provide the largest improvement to model outputs in terms of preserving the thin plume emitted by the volcano. To a lesser extent, the improved representation of the vertical wind field was also shown to reduce plume dispersion. Both of these changes helped to reduce vertical diffusion in the model as much as a brute-force approach (increasing vertical resolution).
      187  96