Fornaro, Gianfranco
Preferred name
Fornaro, Gianfranco
Main Affiliation
11 results
Filters
Settings
The search returned 11 results
Now showing 1 - 10 of 11
- Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Aseismic transient during the 2010-2014 seismic swarm: evidence for longer recurrence of M ≥ 6.5 earthquakes in the Pollino gap (Southern Italy)?
In actively deforming regions, crustal deformation is accommodated by earthquakes and through a variety of transient aseismic phenomena. Here, we study the 2010-2014 Pollino (Southern Italy) swarm sequence (main shock MW5.1) located within the Pollino seismic gap, by analysing the surface deformation derived from Global Positioning System and Synthetic Aperture Radar data. Inversions of geodetic time series show that a transient slip, with the same mechanism of the main shock, started about 3-4 months before the main shock and lasted almost one year, evolving through time with acceleration phases that correlate with the rate of seismicity. The moment released by the transient slip is equivalent to MW5.5, significantly larger than the seismic moment release revealing therefore that a significant fraction of the overall deformation is released aseismically. Our findings suggest that crustal deformation in the Pollino gap is accommodated by infrequent "large" earthquakes (MW ≥ 6.5) and by aseismic episodes releasing a significant fraction of the accrued strain. Lower strain rates, relative to the adjacent Southern Apennines, and a mixed seismic/aseismic strain release are in favour of a longer recurrence for large magnitude earthquakes in the Pollino gap.574 156 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , New insights into fault activation and stress transfer between en echelon thrusts: The 2012 Emilia, Northern Italy, earthquake sequence
Here we present the results of the inversion of a new geodetic data set covering the 2012 Emilia seismic sequence and the following 1 year of postseismic deformation. Modeling of the geodetic data together with the use of a catalog of 3-D relocated aftershocks allows us to constrain the rupture geometries and the coseismic and postseismic slip distributions for the two main events (Mw 6.1 and 6.0) of the sequence and to explore how these thrust events have interacted with each other. Dislocation modeling reveals that the first event ruptured a slip patch located in the center of the Middle Ferrara thrust with up to 1 m of reverse slip. The modeling of the second event, located about 15 km to the southwest, indicates a main patch with up to 60 cm of slip initiated in the deeper and flatter portion of the Mirandola thrust and progressively propagated postseismically toward the top section of the rupture plane, where most of the aftershocks and afterslip occurred. Our results also indicate that between the two main events, a third thrust segment was activated releasing a pulse of aseismic slip equivalent to a Mw 5.8 event. Coulomb stress changes suggest that the aseismic event was likely triggered by the preceding main shock and that the aseismic slip event probably brought the second fault closer to failure. Our findings show significant correlations between static stress changes and seismicity and suggest that stress interaction between earthquakes plays a significant role among continental en echelon thrusts.346 5 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Open Access , Interseismic ground velocities in Central Apennines from GPS and InSAR measurements: new contributions for seismic hazard models by preliminary results of ESA CHARMING project
The contribution of space geodetic techniques to interseismic velocity estimation, and thus seismic hazard modelling, has been recognized since two decades and made possible in more recent years by the increased availability and accuracy of geodetic measurements. We present the preliminary results of a feasibility study performed within the CHARMING project (Constraining Seismic Hazard Models with InSAR and GPS), funded by the European Space Agency (ESA). For a 200 km x 200 km study area, covering the Abruzzi region (central Italy) we measure the mean surface deformation rates from Synthetic Aperture Radar and GPS, finding several local to regional deformation gradients consistent with the tectonic context. We then use a kinematic finite element model to derive the long-term strain rates, as well as earthquake recurrence relations. In turn these are input to state-of-the-art probabilistic seismic hazard models, the output of which is validated statistically using data from the Italian national accelerometric and macroseismic intensity databases.1395 618 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Mid-term review results of the ESA STSE Pathfinder CHARMING project (Constraining Seismic Hazard Models with InSAR and GPS)
We probe the feasibility of integrating GPS and Synthetic Aperture Radar deformation rates within the seismic hazard models of the central Apennines (Italy), exploiting data from over 100 GPS stations and the ~20- year long ERS and ENVISAT SAR image archive. We then use a kinematic finite element model to derive the long-term strain rates, as well as earthquake recurrence relations. In turn these are input to state-of-the-art probabilistic seismic hazard models, the output of which is validated statistically using data from the Italian national accelerometric and macroseismic intensity databases.1208 47 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Assimilation of GPS-Derived Atmospheric Propagation Delay in DInSAR Data Processing
(2014-01-26); ; ; ; Microwave radiation is almost insensitive in terms of power attenuation to the presence of atmosphere; the atmo- sphere is however an error source in repeat pass interferometry due to propagation delay variations. This effect represents a main limitation in the detection and monitoring of weak deformation patterns in differential interferometric Synthetic Aperture Radar (DInSAR), especially in emergency conditions. Due to the wave- length reduction current, X-Band sensors are even more sensitive to such error sources: procedures adopted in classical advanced DInSAR for atmospheric filtering may fail in the presence of higher revisiting rates. In this work, we show such effect on data acquired by the COSMO-SkyMed constellation. The dataset has been acquired with very high revisiting rates during the emer- gency phase. This feature allows clearly showing the inability of standard filtering adopted in common processing chains in handling seasonal atmospheric delay variations over temporal intervals spanning periods shorter than 1 year. We discuss a pro- cedure for the mitigation of atmospheric propagation delay (APD) that is based on the integration of data of GPS systems which carries out measurements with large observation angles diversity practically in continuous time. The proposed algorithm allows a robust assimilation of the GPS atmospheric delay measurements in the multipass DInSAR processing and found on a linear approx- imation with the height of the atmospheric delay corresponding to a stratified atmosphere. Achieved results show a significant mitigation of the seasonal atmospheric variations.187 21 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Space-time distribution of afterslip following the 2009 L’Aquila earthquake
(2012-02-03); ; ; ; The inversion of multitemporal DInSAR and GPS measurements unravels the coseismic and postseismic (afterslip) slip distributions associated with the 2009 MW 6.3 L’Aquila earthquake and provides insights into the rheological properties and long-term behavior of the responsible structure, the Paganica fault. Well-resolved patches of high postseismic slip (10–20 cm) appear to surround the main coseismic patch (maximum slip ≈1 m) through the entire seismogenic layer above the hypocenter without any obvious depth-dependent control. Time series of postseismic displacement are well reproduced by an exponential function with best-fit decay constants in the range of 20–40 days. A sudden discontinuity in the evolution of released postseismic moment at ≈130 days after the main shock does not correlate with independent seismological and geodetic data and is attributed to residual noise in the InSAR time series. The data are unable to resolve migration of afterslip along the fault probably because of the time interval (six days) between the main shock and the first radar acquisition. Surface fractures observed along the Paganica fault follow the steepest gradients of postseismic line-of-sight satellite displacements and are consistent with a sudden and delayed failure of the shallow layer in response to upward tapering of slip. The occurrence of afterslip at various levels through the entire seismogenic layer argues against exclusive depth-dependent variations of frictional properties on the fault, supporting the hypothesis of significant horizontal frictional heterogeneities and/or geometrical complexities. We support the hypothesis that such heterogeneities and complexities may be at the origin of the long-term variable behavior suggested by the paleoseismological studies. Rupture of fault patches with dimensions similar to that activated in 2009 appears to have a ≈500 year recurrence time interval documented by paleoseismic and historical studies. In addition to that, paleoseismological evidence of large (>0.5 m) coseismic offsets seems to require seismic events, recurring every 1000–2000 years, characterized by (1) multisegment linkage, (2) surface ruptures larger than in 2009, and (3) complete failure of the 2009 coseismic and postseismic patches.230 36 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Inversion of Wrapped Differential Interferometric SAR Data for Fault Dislocation Modeling
(2012); ; ; ; The Differential Synthetic Aperture Radar (SAR) Interferometry technique has dramatically boosted the application of remote sensing in many geophysical disciplines, particularly tectonics. Coseismic interferograms have provided, in many cases, “images of earthquakes,” showing the surface displacement due to the deep fault dislocation. Aside from being visually appealing, interferograms are of fundamental importance for the analysis, by means of appropriate dislocation models, of the geometrical and kinematic characteristics of the fault, which are also parameters of key interest for earthquake risk management. This paper provides a contribution in the general framework of the integration of dislocation models in Differential SAR Interferometry processing. In particular, with reference to coseismic interferograms, it proposes a technique that allows the direct inversion of wrapped interferograms for dislocation model analysis. This option makes it possible to avoid the critical and error-prone processing step of phase unwrapping, carried out in the classical analysis of interferometric data. Examples of inversion of real data, relevant to the 1999 Athens and Izmit earthquakes, demonstrate the feasibility and the advantages of this data processing approach.189 28 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Volcanic spreading of Vesuvius, a new paradigm for interpreting its volcanic activity
(2005); ; ; ; We integrate geologic, structural, leveling and Differential SAR Interferometry data to show that Vesuvius began to spread onto its sedimentary substratum about 3,600 years ago. Moreover, we model the detected deformation with a solution of the lubrication approximation of the Navier-Stokes equations to show that spreading may continue for about 7,200 years more. Correlation of volcanic spreading with phases of the eruptive activity suggests that Plinian eruptions, which are thought to pose the major hazard, are less likely to occur in the near future.217 139 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , The use of IFSAR and classical geodetic techniques for caldera unrest episodes: application to the Campi Flegrei uplift event of 2000
Campi Flegrei caldera has a long history of large surface deformation,with isplacements of several meters in the 1970s and early 1980s. Its location within a densely populated urban area underscores the importance of understanding the relationship between large and episodic deformation events and their source mechanisms. The primary observable of the caldera’s activity is its surface deformation. Classical geodetic approaches such as leveling, have been complemented by the more advanced measurements of the Global Positioning System (GPS) and Synthetic Aperture Radar (SAR) interferometry. In this work we focus on the Campi Flegrei caldera uplift event that occurred from early spring to late summer 2000. Our goal is to highlight the potential to integrate interferometric SAR (IFSAR),GPS, and classical leveling data for ground deformation studies and source modeling. We compare models for the deformation source constrained by inversion of the differential IFSAR data (DIFSAR) with the model’s prediction for the GPS and leveling data. Resolution of possible changes in the source mechanism for Campi Flegrei caldera are limited by differences in the temporal,spatial and deformation component strengths of each data set. In the future,overcoming these data deficiencies will be important for resolving the dynamics of volcano systems and for volcanic hazard mitigation.1428 118 - Some of the metrics are blocked by yourconsent settings
Item type:Publication, Access status: Restricted , Modelling coseismic displacements resulting from SAR interferometry and GPS measurements during the 1997 Umbria-Marche seismic sequence
(2000); ; ; ; In this study we analyse coseismic GPS displacements and DInSAR data to constrain a dislocation model for the three largest earthquakes of the 1997 Umbria-Marche seismic sequence. The first two events, which occurred on September 26 at 00:33 GMT (Mw 5.7) and 09:40 GMT (Mw 6.0) respectively, are investigated using both GPS displacements and DInSAR interferograms.We discuss and compare the results of previous studies which separately modeled a smaller subset of geodetic data. We provide a dislocation model for these two earthquakes which fits well both GPS and DInSAR data and agrees with the results of seismological and geological investigations. The first event consists of a unilateral rupture towards the southeast with a uniform dislocation. The strike, rake and dip angles are those resulting from the CMT solution. The second event consists of an unilateral rupture towards the northwest and a variable slip distribution on the fault plane. The strike and the rake are consistent with the CMT solution, but the dip angle has been slightly modified to improve the simultaneous fit of GPS and DInSAR data. While the second rupture (09:40 GMT) arrived very close to the surface, the fit to geodetic data shows that the first rupture (00:33 GMT) is deeper (2 km), despite the more evident surface geological effects. The analysis of new SAR interferograms allows the identification of a 5–6 cm additional displacement caused by the October 3 (Mw 5.2) and 6 (Mw 5.4) seismic events.We use data from a new DInSAR interferogram to model the displacement field of the Sellano earthquake of October 14, 1997. For this event significant GPS measurements were not available. We tested two different fault plane geometries: a blind, planar fault (top depth = 2.4 km), and a curved (listric) fault reaching the surface. The two models provide a generally similar fit to the data, and show that most of the slip was released at depths greater than 2.4 km along a gently dipping (40 –45 ) fault surface. They also show that a unilateral rupture does not allow fitting the interferometric fringes since there is evident surface deformation to the northwest of the hypocenter. Moreover, we suggest that the concentration of high residuals in the southern part of our uniform slip model may in fact indicate a certain slip variability in this area. We conclude that, despite the moderate magnitudes and the lack of significant surface faulting, the space geodetic data allowed to constrain dislocation models giving new insights in the rupture process of the three largest events of the sequence.352 29
