Please use this identifier to cite or link to this item: http://hdl.handle.net/2122/12462
Authors: Pepe, Fabrizio* 
Corradino, Marta* 
Parrino, Nicolò* 
Besio, Giovanni* 
Lo Presti, Valeria* 
Renda, Pietro* 
Calcagnile, Lucio* 
Quarta, Gianluca* 
Sulli, Attilio* 
Antonioli, Fabrizio* 
Title: Boulder coastal deposits at Favignana Island rocky coast (Sicily, Italy): Litho-structural and hydrodynamic control
Journal: Geomorphology 
Series/Report no.: /303(2018)
Issue Date: 2018
DOI: 10.1016/j.geomorph.2017.11.017
Abstract: Boulders are frequently dislodged from rock platforms, transported and deposited along coastal zones by high- magnitude storm waves or tsunamis. Their size and shape are often controlled by the thickness of bedding planes as well as by high-angle to bedding fracture network. We investigate these processes along two coastal areas of Favignana Island by integrating geological data for 81 boulders, 49 rupture surfaces (called sockets) and fracture orientation and spacing with four radiocarbon dates, numerical hydrodynamic analysis, and hindcast numerical simulation data. Boulders are scattered along the carbonate platform as isolated blocks or in small groups, which form, as a whole, a discontinuous berm. Underwater surveys also highlight free boulders with sharp edges and sockets carved out in the rock platform. Boulders are composed of ruditic- to arenitic-size clastic carbonates. Their size ranges from 0.6 to 3.7 m, 0.55 to 2.4 m, and 0.2 to 1 m on the major (A), medium (B), and minor (C) axes, respectively. The highest value of mass estimation is 12.5 t. Almost all of boulders and sockets are char- acterized by a tabular or bladed shape. The comparisons between a) the fractures spacing and the length of A- and B-axes, and b) the frequency peaks of C-axis with the recurrent thickness of beds measured along the coastal zone demonstrate the litho-structural control in the size and shape of joint-bounded boulders. These comparisons, to- gether with the similarity between the shapes of the boulders and those of the sockets as well as between the lithology of boulders and the areas surrounding the sockets, suggest that blocks originate by detachment from the platform edge. Thus, the most common pre-transport setting is the joint-bounded scenario. Hydrodynamic equations estimate that the storm wave heights necessary to initiate the transport of blocks diverge from ~2 m to ~8 m for joint-bounded boulders and from few tens of centimeters up to ~11 m for submerged boulders. The comparison between the wave heights at the breaking point of the coastal zones with the results of hydro- dynamic equations shows that waves approaching the coastline are able to transport all surveyed boulders. Our data suggest that boulders have been transported by several storm events, even in very recent times.
Appears in Collections:Article published / in press

Files in This Item:
File Description SizeFormat Existing users please Login
Pepeetal.2018Geomorphology.pdf4.1 MBAdobe PDF
Show full item record

WEB OF SCIENCETM
Citations 50

16
checked on Feb 7, 2021

Page view(s)

67
checked on Apr 24, 2024

Download(s)

1
checked on Apr 24, 2024

Google ScholarTM

Check

Altmetric