Radiography of a normal fault system by 64,000 high-precision earthquake locations: The 2009 L’Aquila (central Italy) case study

We studied the anatomy of the fault system where the 2009 L’Aquila earthquake
(MW 6.1) nucleated by means of ~64 k high-precision earthquake locations spanning
1 year. Data were analyzed by combining an automatic picking procedure for P and S
waves, together with cross-correlation and double-difference location methods reaching a
completeness magnitude for the catalogue equal to 0.7 including 425 clusters of similar
earthquakes. The fault system is composed by two major faults: the high-angle L’Aquila
fault and the listric Campotosto fault, both located in the first 10 km of the upper crust. We
detect an extraordinary degree of detail in the anatomy of the single fault segments
resembling the degree of complexity observed by field geologists on fault outcrops. We
observe multiple antithetic and synthetic fault segments tens of meters long in both the
hanging wall and footwall along with bends and cross fault intersections along the main
fault and fault splays. The width of the L’Aquila fault zone varies along strike from 0.3 km
where the fault exhibits the simplest geometry and experienced peaks in the slip
distribution, up to 1.5 km at the fault tips with an increase in the geometrical complexity.
These characteristics, similar to damage zone properties of natural faults, underline the key
role of aftershocks in fault growth and co-seismic rupture propagation processes.
Additionally, we interpret the persistent nucleation of similar events at the seismicity cutoff depth as the presence of a rheological (i.e., creeping) discontinuity explaining how normal faults detach at depth.

Agosta, F., and A. Aydin (2006), Architecture and deformation mechanism
of a basin-bounding normal fault in Mesozoic platform carbonates,
Central Italy, J. Struc. Geol., 28, 1445–1467.
Aki, K. (1979), Characterization of barriers on an earthquake fault,
J. Geophys. Res., 84, 6140–6148.
Aldersons, F., R. Di Stefano, L. Chiaraluce, D. Piccinini, and L. Valoroso
(2009), Automatic detection, and P and S wave picking algorithm: An
application to the 2009 L’Aquila (central Italy) earthquake sequence,
Eos Trans. AGU, 90(52), Fall Meet. Suppl., Abstract U23B-0045.
Amoruso, A., and L. Crescentini (2009), Slow diffusive fault slip propagation
following the 6 April 2009 L’Aquila earthquake, Italy, Geophys. Res.
Lett., 36, L24306, doi:10.1029/2009GL041503.
Bakun, W. H., et al. (2005), Implications for prediction and hazard assessment
from the 2004 Parkfield, California, earthquake, Nature, 437, 969–974.
Beeler, N. M., S. H. Hickman, and T.-F. Wong (2001), Earthquake stress
drop and laboratory-inferred interseismic strength recovery, J. Geophys.
Res., 106 (B12), doi:10.1029/2000JB900242.
Berg, S. S. and T. Skar (2005), Controls on damage zone asymmetry of a
normal fault zone: Outcrop analyses of a segment of the Moab fault, SE
Utah, J. Struct. Geol., (27), 1803–1822, doi:10.1016/j.jsg.2005.04.012.
Boatwright, J. and M. Cocco (1996), Frictional constraints on crustal
faulting, J. Geophys. Res. 101(B6): doi: 10.1029/96JB00405.
Boncio, P., A. Pizzi, F. Brozzetti, G. Pomposo, G. Lavecchia, D. Di Naccio,
and F. Ferrarini (2010), Coseismic ground deformation of the 6 April
2009 L’Aquila earthquake (central Italy, MW 6.3), Geophys. Res. Lett.,
37, L06308, doi:10.1029/2010GL042807.
Calderoni, G., A. Rovelli, and R. Di Giovambattista (2010), Large amplitude
variations recorded by an on-fault seismological station during the
L’Aquila earthquakes: Evidence for a complex fault-induced site effect,
Geophys. Res. Lett., 37, L24305, doi:10.1029/2010GL045697.
Chen, K. H., R. Burgmann, R. M. Nadeau, T. Chen, and N. Lapusta (2010),
Postseismic variations in seismic moment and recurrence interval of
repeating earthquakes, Earth Planet. Sci. Lett., 299, doi:10.1016/j.
epsl.2010.08.027.
Chiarabba, C., et al. (2009), The 2009 L’Aquila (central Italy) MW 6.3 earthquake:
Main shock and aftershocks, Geophys. Res. Lett., 36, L18308,
doi:10.1029/2009GL039627.
Chiaraluce, L. (2012), Unravelling the complexity of Apenninic extensional
fault systems: A review of the 2009 L’Aquila earthquake (Central
Apennines, Italy), J. Struct. Geol., 42, 2–18, doi:10.1016/j.jsg.2012.06.007.
Chiaraluce, L., W. L. Ellsworth, C. Chiarabba, and M. Cocco (2003), Imaging
the complexity of an active normal fault system: The 1997 Colfiorito
(central Italy) case study, J. Geophys. Res., 108(B6), 2294, doi:10.1029/
2002JB002166.Chiaraluce, L., L. Valoroso, M. Anselmi, S. Bagh, and C. Chiarabba (2009),
A decade of passive seismic monitoring experiments with local networks
in four Italian regions, Tectonophysics, 476, 85–98, doi:10.1016/j.
tecto.2009.02.013.
Chiaraluce, L., L. Valoroso, D. Piccinini, R. Di Stefano, and P. De Gori
(2011a), The anatomy of the 2009 L’Aquila normal fault system (central
Italy) imaged by high resolution foreshock and aftershock locations,
J. Geophys. Res., 116, B12311, doi:10.1029/2011JB008352.
Chiaraluce, L., C. Chiarabba, P. De Gori, R. Di Stefano, L. Improta,
D. Piccinini, A. Schlagenhauf, P. Traversa, L. Valoroso, and C. Voisin
(2011b). The 2009 L’Aquila (central Italy) seismic sequence, Boll. Geofis.
Teor. Appl., 52(3), 367–387, doi:10.4430/bgta0019.
Cirella, A., A. Piatanesi, E. Tinti, M. Chini and M. Cocco (2012), Complexity
of the rupture process during the 2009 L’Aquila, Italy, earthquake,
Geophys. J. Int., 190, 607–621, doi:10.1111/j.1365-246X.2012.05505.x.
Collettini C., M. R. Barchi, L. Chiaraluce, F. Mirabella, and S. Pucci (2003),
The Gubbio fault: Can different methods give pictures of the same
object?, J. Geody., (36), 51–66, ISSN: 0264–3707
Cowie, P. A., and C. H. Scholz (1992), Growth of faults by accumulation of
seismic slip, J. Geophys. Res., 97, doi:10.1029/92JB00586.
D’Agostino, N., A. Avallone, D. Cheloni, E. D’Anastasio, S. Mantenuto,
and G. Selvaggi (2008), Active tectonics of the Adriatic region from
GPS and earthquake slip vectors, J. Geophys. Res., 113, B12413,
doi:10.1029/2008JB005860.
D’Agostino, N., D. Cheloni, G. Fornaro, R. Giuliani, and D. Reale (2012),
Space-time distribution of afterslip following the 2009 L’Aquila earthquake,
J. Geophys. Res., 117, B02402, doi:10.1029/2011JB008523.
D’Agostino, N., R. Giuliani, M. Mattone, and L. Bonci (2001), Active
crustal extension in the central Apennines (Italy) inferred from GPS measurements
in the interval 1994–1999, Geophys. Res. Lett., 28, 2121–2124,
doi:10.1029/2000GL012462.
De Paola N., C. Collettini, D. R. Faulkner and F. Trippetta (2008),
Fault zone architecture and deformation processes within evaporitic rocks
in the upper crust, Tectonics, 27, ISSN: 0278–7407, doi: 10.1029/
2007TC002230.
Di Luccio, F., G. Ventura, R. Di Giovambattista, A. Piscini, and F. R. Cinti
(2010), Normal faults and thrusts reactivated by deep fluids: The 6 April
2009 MW 6.3 L’Aquila earthquake, central Italy, J. Geophys. Res., 115,
B06315, doi:10.1029/2009JB007190.
Di Stefano, R., F. Aldersons, E. Kissling, P. Baccheschi, C. Chiarabba, and
D. Giardini (2006), Automatic seismic phase picking and consistent
observation error assessment: Application to the Italian seismicity,
Geophys. J. Int., 165, 121–134.
Di Stefano, R., C. Chiarabba, L. Chiaraluce, M. Cocco, P. De Gori, D.
Piccinini, and L. Valoroso (2011), Fault zone properties affecting the rupture
evolution of the 2009 (MW 6.1) L’Aquila earthquake (central Italy):
Insights from seismic tomography, Geophys. Res. Lett., 38, L10310,
doi:10.1029/2011GL047365.
Diehl, T., N. Deichmann, E. Kissling, and E. Husen (2009), Automatic
S-wave picker for local earthquake tomography, Bull. Seism. Soc. Am.,
99, 3, 1906–1920, doi: 10.1785/0120080019.
EMERGEO Working Group (2009), Evidence for surface rupture associated
with the MW 6.3 L’Aquila earthquake sequence of April 2009 (central Italy),
Terra Nova, 22, 43–51, doi:10.1111/j.1365-3121.2009.00915.x.
Felzer, K. R., and E. E. Brodsky (2005), Testing the stress shadow hypothesis,
J. Geophys. Res., 110, B05S09, doi:10.1029/2004JB003277.
Fréchet, J. (1985), Sismogenése et doublets sismiques, thése d’Etat, 206 pp.,
Univ. é Sci. et Méd. de Grenoble, Grenoble, France.
Galadini, F., and P. Galli (2000), Active tectonics in the central Apennines
(Italy)—Input data for seismic hazard assessment, Nat. Hazards, 22,
225–268, doi:10.1023/A:1008149531980.
Galli, P., B. Giaccio, and P. Messina (2010), The 2009 central Italy earthquake
seen through 0.5 Myr-long tectonic history of the L’Aquila faults
system, Quat. Sci. Rev., 29, 3768–3789.
Galli, P., B. Giaccio, P. Messina, E. Peronace and G. M. Zuppi (2011),
Palaeoseismology of the L’Aquila faults (central Italy, 2009, MW 6.3
earthquake): Implications for active fault linkage, Geophys. J. Int., 187,
1119–1134, doi: 10.1111/j.1365-246X.2011.05233.x.
Geller, R. J., and C. S. Mueller (1980), Four similar earthquakes in
central California, Geophys. Res. Lett., 7, 821–824, doi:10.1029/
GL007i010p00821.
Herrmann, R. B., L. Malagnini, and I. Munafò (2011), Regional moment
tensors of the 2009 L’Aquila earthquake sequence, Bull. Seismol. Soc.
Am., 101, 975–993, doi:10.1785/0120100184.
Hunstad, I., G. Selvaggi, N. D’Agostino, P. England, P. Clarke, and M.
Pierozzi (2003), Geodetic strain in peninsular Italy between 1875 and
2001, Geophys. Res. Lett., 30(4), 1181, doi:10.1029/2002GL016447.
Johanson, I. A., E. J. Fielding, R. Rolandone and R. Bürgmann (2006),
Coseismic and postseismic slip of the 2004 Parkfield earthquake from
space-geodetic data, Bull. Seism. Soc. Am., 96, S269–S282.Kato A., K. Obara, T. Igarashi, H. Tsuruoka, S. Nakagawa, and N. Hirata
(2012), Propagation of slow slip leading up to the 2011 MW 9.0 TohokuOki
earthquake, Science, 335, 705, DOI:10.1126/science.1215141
Lahr, J. C. (1989), HYPOELLIPSE/version 2.00: A computer program for
determining local earthquakes hypocentral parameters, magnitude and
first motion pattern, U.S. Geol. Surv., Open File Rep., 89–116, 162.
Lucente, F. P., P. De Gori, L. Margheriti, D. Piccinini, M. Di Bona,
C. Chiarabba, and N. P. Agostinetti (2010), Temporal variation of seismic
velocity and anisotropy before the 2009 MW 6.3 L’Aquila earthquake,
Italy, Geology, 38, 1015–1018, doi:10.1130/G31463.1.
Malagnini, L., F. P. Lucente, P. De Gori, A. Akinci, and I. Munafo’ (2012),
Control of pore fluid pressure diffusion on fault failure mode: Insights
from the 2009 L’Aquila seismic sequence, J. Geophys. Res., 117,
B05302, doi:10.1029/2011JB008911.
Malinverno, A., W. B. F. Ryan (1986), Extension in the Tyrrhenian Sea and
shortening in the Apennines as result of arc migration driven by sinking
of the lithosphere, Tectonics, 5, 227–245.
Margheriti, L., et al. (2011), Rapid response seismic networks in Europe:
Lessons learnt from the L’Aquila earthquake emergency, Ann. Of Geoph.
54, 4, 2011; doi: 10.4401/ag-4953.
Marone, C., J. E. Vidale, and W. Ellsworth (1995), Fault healing inferred
from time dependent variations in source properties of repeating earthquake,
Geophys. Res. Lett., 22, 3095–3098.
Marsan, D. (2005), The role of small earthquakes in redistributing crustal
elastic stress, Geophys. J. Int., 163, 141–151, doi:10.1111/j.1365-246X.
2005.02700.x
Marzocchi, W., and A. M. Lombardi (2009), Real-time forecasting following a
damaging earthquake, Geophys. Res. Lett., 36, L21302, doi:10.1029/
2009GL040233.
Micarelli, L., I. Moretti, and J. M. Daniel (2003), Structural properties of
rift-related normal faults: The case study of the Gulf of Corinth, Greece,
J. Geodyn., 36(1–2), 275–303, doi:10.1016/S0264-3707(03)00051-6.
Mitchell T. and D. R. Faulkner (2009). The nature and origin of off-fault
damage surrounding strike-slip fault zones with a wide range of displacements:
A field study from the Atacama fault system, northern Chile.
J. Struct. Geol., 31, 802–816, doi:10.1016/j.jsg.2009.05.002.
Montone, P., M. T. Mariucci, S. Pondrelli, and A. Amato (2004), An
improved stress map for Italy and surrounding regions (central Mediterranean),
J. Geophys. Res., 109, B10410, doi:10.1029/2003JB002703.
Nadeau, R. M. and T. V. McEvilly (1999), Fault slip rates at depth from recurrence
intervals of repeating microearthquakes, Science, 285, 718–721.
Paige, C. C., and M. A. Saunders (1982), LSQR: An algorithm for sparse linear
equations and sparse least squares, ACM Trans. Math. Softw., 8, 43–71.
Parotto, M., and A. Praturlon (1975), Geological summary of the central
Apennines, in Structural Model of Italy, Quad. Ric. Sci., 90, 257–311,
Cons. Naz. delle Ric., Rome.
Patacca, E., P. Scandone, E. Di Luzio, G. P. Cavinato, and M. Parotto
(2008), Structural architecture of the central Apennines: Interpretation
of the CROP 11 seismic profile from the Adriatic coast to the orographic
divide, Tectonics, 27, TC3006, doi:10.1029/2005TC001917.
Peng, Z., J. E. Vidale, C. Marone, and A. Rubin (2005), Systematic
variations in recurrence interval and moment of repeating aftershocks,
Geophys. Res. Lett., 32, L15301, doi:10.1029/2005GL022626.
Pino, N. A., and F. Di Luccio (2009), Source complexity of the 6 April
2009 L’Aquila (central Italy) earthquake and its strongest aftershock
revealed by elementary seismological analysis, Geophys. Res. Lett., 36,
L23305, doi:10.1029/2009GL041331.
Pondrelli, S., S. Salimbeni, A. Morelli, G. Ekstrom, M. Olivieri, and E.
Boschi (2010), Seismic moment tensors of the April 2009, L’Aquila
(Central Italy), earthquake sequence, Geophys. J. Int. (2010) 180, 238–242
doi: 10.1111/j.1365-246X.2009.04418.x
Poupinet, G., W. L. Ellsworth, and J. Frechet (1984), Monitoring velocity
variations in the crust using earthquake doublets: An application to the
Calaveras Fault, California, J. Geophys. Res., 89, 5719–5731,
doi:10.1029/JB089iB07p05719.
Rice, J. R., C. Sammis, and R. Parsons (2005), Off-fault secondary failure
induced by a dynamic slip pulse, Bull. Seismol. Soc. Am., 95(1), 109–134,
doi:10.1785/0120030166.
Rowe, C. A., R. C. Aster, B. Borchers, and C. J. Young (2002), An automatic,
adaptive algorithm for refining phase picks in large seismic data
sets, Bull. seism. Soc. Am., 92(5), 1660–1674.
Sammis, C. G., and J. R. Rice (2001), Repeating earthquakes as lowstressdrop
events at a border between locked and creeping fault patches,
Bull. Seismol. Soc. Am., 91, 532–537.
Savage, H. M., and E. E. Brodsky (2011), Collateral damage: Evolution with
displacement of fracture distribution and secondary fault strands in fault
damage zones, J. Geophys. Res., 116, B03405, doi:10.1029/2010JB007665.
Schaff, D. P., and G. C. Beroza (2004), Coseismic and postseismic velocity
changes measured by repeating earthquakes, J. Geophys. Res., 109,
B10302, doi:10.1029/2004JB003011.Schaff, D. P., and F. Waldhauser (2005). Waveform cross-correlation-based
differential travel-time measurements at the Northern California Seismic
Network, Bull. Seismol. Soc. Am. 95, 2446–2461, doi 10.1785/0120040221.
Schaff, D. P., G. H. R. Bokelmann, G. C. Beroza, F. Waldhauser, and W. L.
Ellsworth (2002), High resolution image of Calaveras Fault seismicity,
J. Geophys. Res., 107(B9), 2186, doi:10.1029/2001JB000633.
Schaff, D. P., G. Bokelmann, W. L. Ellsworth, E. Zanzerkia, F. Waldhauser,
and G. C. Beroza (2004), Optimizing correlation techniques for improved
earthquake location, Bull. Seismol. Soc. Am., 94, 705–721, doi:10.1785/
0120020238.
Scholz, C. H. (2002), The Mechanics of Earthquakes and Faulting,
Cambridge Univ. Press, Cambridge, U. K.
Schorlemmer, D., F. Mele, and W. Marzocchi (2010), A completeness analysis
of the National Seismic Network of Italy, J. Geophys. Res., 115,
B04308, doi:10.1029/2008JB006097.
Scognamiglio, L., E. Tinti, A. Michelini, D. S. Dreger, A. Cirella, M.
Cocco, S. Mazza, and A. Piatanesi (2010), Fast determination of moment
tensors and rupture history: What has been learned from the 6 April
2009 L’Aquila earthquake sequence, Seismol. Res. Lett., 81, 892–906,
doi:10.1785/gssrl.81.6.892.
Uchida, N., J. Nakajima, A. Hasegawa, and T. Matsuzawa (2009), What
controls interplate coupling?: Evidence for abrupt change in coupling
across a border between two overlying plates in the NE Japan subduction
zone, Earth Planet. Sci. Lett., 283, 111–121.
Valoroso, L., L. Improta, L. Chiaraluce, R. Di Stefano, L. Ferranti, A.
Govoni, and C. Chiarabba (2009), Active faults and induced seismicity
in the Val d’Agri region (southern Apennines, Italy), Geophys. J. Int.,
178, 488–502, doi:10.1111/j.1365-246X.2009.04166.x.
Vermilye, J. M., and C. H. Scholz (1998), The process zone: A microstructural
view of fault growth, J. Geophys. Res., 103(B6), 12,223–12,237,
doi:10.1029/98JB00957.
Vidale, J. E., W. L. Ellsworth, A. Cole, and C. Marone (1994), Variations in
rupture process with recurrence interval in a repeated small earthquake,
Nature, 368, 624–626.
Waldhauser, F. (2001), hypoDD: A program to compute double-difference
hypocenter locations, U.S. Geol. Surv. Open File Rep., 01–113.
Waldhauser, F. (2009), Near-real-time double-difference event location
using long-term seismic archives, with application to Northern
California, Bull. Seism. Soc. Am., 99, 5, 2736–2748, doi: 10.1785/
0120080294
Waldhauser, F., and W. L. Ellsworth (2000), A double-difference earthquake
location algorithm: Method and application to the northern
Hayward Fault, California, Bull. Seismol. Soc. Am., 90, 1353–1368,
doi:10.1785/0120000006.
Waldhauser, F., and D. P. Schaff (2008), Large-scale relocation of two
decades of Northern California seismicity using cross-correlation
and double-difference methods, J. Geophys. Res., 113, B08311,
doi:10.1029/2007JB005479.
Wiemer, S. (2001), A software package to analyze seismicity: ZMAP,
Seismol. Res. Lett. 72, 2.
Wiemer, S., and M. Wyss (2000), Minimum magnitude of complete
reporting in earthquake catalogs: Examples from Alaska, the Western
United States, and Japan, Bull. Seismol. Soc. Am., 90, 859–869.
Wilkinson, M., et al. (2010), Partitioned postseismic deformation associated
with the 2009 MW 6.3 L’Aquila earthquake surface rupture measured
using a terrestrial laser scanner, Geophys. Res. Lett., 37, L10309,
doi:10.1029/2010GL043099.