Skip to main content
The search returned 6 results
Now showing 1 - 6 of 6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Ambient Vibrations of Age-old Masonry Towers: Results of Long-term Dynamic Monitoring in the Historic Centre of Lucca

    The paper presents the results of an ambient vibration monitoring campaign conducted on the so-called “Clock Tower” (Torre delle Ore), one of the best known and most visited monuments in the historic centre of Lucca. The vibrations of the tower were continuously monitored from November 2017 to March 2018 using high-sensitivity instrumentation. In particular, four seismic stations provided by the Istituto Nazionale di Geofisica e Vulcanologia and two three-axial accelerometers developed by AGI S.r.l., spin-off of the National Institute for Astrophysics, were installed on the tower. The measured vibration level was generally very low, since the structure lies in the middle of a limited traffic area. Nevertheless, the availability of two different types of highly sensitive and accurate instruments allowed the authors to follow the dynamic behaviour of the tower during the entire monitoring period and has moreover provided cross-validation of the results.
      162  136
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    The influence of environmental parameters on the dynamic behaviour of the San Frediano bell tower in Lucca

    This paper aims at assessing the influence of environmental parameters on the modal characteristics of age–old masonry constructions. The results of a long–term ambient vibration monitoring of the San Frediano bell tower in Lucca (Italy) are reported. The tower, dating back to the 11th century, has been fitted along its height with four triaxial seismometric stations, which were left active for about one year. Data from the monitoring system have been processed via the Stochastic Subspace Identification Method in order to identify the tower’s modal characteristics and their variations over the year. The dependence of the tower’s frequencies on the ambient temperature was first studied and simulated via simple auto–regressive models. Then, some output–only models based on the principal component analysis (PCA) were applied, under the hypotheses of both linear and nonlinear (Kernel PCA) dependence of the natural frequencies on the unknown environmental parameters. The results indicate PCA to be an effective tool for detecting changes in the dynamic characteristics of masonry constructions.
      285  7
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A new numerical procedure for assessing the dynamic behaviour of ancient masonry towers

    The paper presents a new numerical procedure for the modal analysis of ma- sonry structures implemented in the finite element code NOSA-ITACA, which models masonry as a nonlinear elastic material with zero tensile strength and infinite or bounded compressive strength. The procedure, which allows for taking into account the effects of the stress field and crack distribution within a structure on its natural frequencies and mode shapes, is ap- plied to assess the dynamic behaviour of a medieval bell tower in Lucca. Data recorded by the monitoring system installed on the tower have been processed via suitable modal identifi- cation algorithms, which have enabled calculating the tower’s modal frequencies, mode shapes and damping ratios. Then, the tower has been analysed via the NOSA-ITACA code and model updating techniques applied to fit the data measured on the tower. The results of the standard modal analysis have been compared to those of modal analyses conducted on the structure subjected to its own weight while taking into account the corresponding crack distribution.
      101  186
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Seismic response and ambient vibrations of a Mediaeval Tower in the Mugello area (Italy)

    This paper describes the experimental campaigns on the Tower of the Palazzo dei Vicari in Scarperia, a village in the Mugello area (Tuscany) exposed to high seismic hazards. The first campaign was carried out from December 2019 to Janu- ary 2020, and the Tower underwent the so-called Mugello seismic sequence, which featured an M 4.5 earthquake. Other ambient vibration tests were repeated in June 2021 and September 2023 when another seismic sequence struck the area near Scarperia. These tests aimed to characterise the Tower’s dynamic behaviour under ambient and seismic excitations and check the response of the Tower over time. The experimental results were then used to calibrate a finite-element model of the Tower and estimate its seismic vulnerability. Several numerical simulations were conducted on the calibrated model using the NOSA-ITACA code for nonlinear structural analysis of masonry buildings. The dynamic behaviour of the Tower subjected to a seismic sequence recorded in 2023 by a seismic station at the base was investigated by comparing the velocities recorded along the Tower’s height with their numerical counterparts. Furthermore, several pushover analyses were conducted to investigate the collapse of the Tower as the load’s distribution and direction varied
      19  41
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Long-Term Dynamic Monitoring of Medieval Masonry Towers

    The aim of the paper is to present and discuss the results of an ambient vibration monitoring campaign conducted in the old town of Lucca, over the period 2015–2018. Despite the low level of the ambient vibrations in the historic center, using high-sensitivity instrumentation allowed the authors to measure and study the dynamic behavior of two medieval masonry towers: the San Frediano belfry and the Clock Tower. The main results of the dynamic identification of the towers are summarized, together with the variation over time of their dynamic properties. Some insights on the towers' response to the anthropic activities in the historic center are also presented. Finally, a finite element simulation is performed with the aim of assessing the influence of temperature variations on the towers' natural frequencies; good agreement is found between numerical and experimental results. The paper provides the scientific and technical community with a detailed report on a singular experiment in the field of architectural heritage.
      182  98
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Experimental and numerical investigations on the seismic behaviour of the San Frediano bell tower in Lucca

    This paper presents a study on the seismic response of the San Frediano bell tower in Lucca. The tower’s ambient vibrations were con− tinuously monitored for about one year, from October 2015 to October 2016. During this monitoring campaign, many seismic events were recorded on the tower and the most relevant turned out to be the Amatrice earthquake, which struck Central Italy on 24 August 2016. The paper begins with a review of the experimental results obtained. Then, a finite element numerical model of the tower is presented and validated via model updating, by assuming the tower’s constituent materials to be unable to withstand tensile stresses. The exper− imental records of the Amatrice earthquake are also included in the analysis to assess the dynamic behaviour of the finite element model under ambient vibrations. Finally, a numerical simulation is performed of the tower subjected to the Lunigiana earthquake, recorded in Fivizzano (Tuscany) on 21 June 2013: the results of the dynamic analysis are presented and discussed.
      227  126