Skip to main content
The search returned 56 results
Now showing 1 - 10 of 56
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Bollettino Sismico Italiano: Analisys of Early Aftershocks of the 2016 MW 6.0 Amatrice, MW 5.9 Visso and MW 6.5 Norcia earthquakes in Central Italy

    The Amatrice-Visso-Norcia seismic sequence is the most important of the last 30 years in Italy. The seismic sequence started on 24 August, 2016 and still is ongoing in central Apennines. At the end of February 2017 more than 57,000 events were located, 80,000 events up to the end of September 2017 (Fig. 1). The mainshocks of the sequence occurred on 24 August 2016 (Mw 6.0 and Mw 5.4), 26 October 2016 (Mw 5.4 and Mw 5.9), 30 October 2016 (Mw 6.5), 18 January 2017 (four earthquakes Mw≥ 5.0). In this seismic sequence, all the waveforms recorded by temporary stations deployed by the SISMIKO emergency group (stations T12**; Moretti et al., 2016) where available in real- time at the surveillance room of INGV. Because of the high level of seismicity and the dense seismic network installed in the region, more than 150 events per day were located at the end of February 2017; still 60 events per day were located up to the end of August 2017.The Amatrice-Visso-Norcia is the most important seismic sequence since 2015, the time when the analysis procedures of the BSI group (Bollettino Sismico Italiano) were revised (Nardi et al., 2015). BSI is now available every four months on the web: bulletins contain revised earthquakes (location and magnitude) with ML≥ 1.5, quasi-real time revision of ML≥ 3.5 earthquakes and phase arrivals from waveforms recorded on seismic stations available from the European Integrated Data Archive (EIDA), (Mazza et al., 2012). These last procedures allow the integration of signals from temporary seismic stations (Moretti et al., 2014) installed by the emergency group SISMIKO (Moretti and Sismiko working group, 2016), even when they are not in real time transmission, if they are rapidly archived in EIDA, together with real time signals from the seismic stations of the permanent INGV network. The analysis strategy of the BSI group for the Amatrice -Visso - Norcia seismic sequence (AVN.s.s in the following) was to select the earthquakes located in the box with min/max latitude: 42.2/43.2 - and min/max longitude: 12.4/14.1 to prepare a special volume of BSI on the seismic sequence.
      334  280
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Preliminary results from seismic monitoring at Nyiragongo Volcano through telemetered seismic network, Goma Volcano Observatory (Gvo, Democratic Republic Of Congo).

    Following the catastrophic eruption of Volcano Nyiragongo on January 17, 2002, a great effort has been devoted to the seismic surveillance of volcanoes Nyiragongo and Nyamuragira located at the North of Lake Kivu in the Western branch of the east African rift. The relatively small loss of life in the January 2002 eruption (less than 100 deaths in a population of 500,000) was remarkable, and psychological stress was reportedly the main health consequence in the aftermath of the eruption. In fact, after 2002 january eruption, which was triggered by tectonic spreading of the Kivu rift causing the ground to fracture and allow lava to flow from ground fissures out of the crater lava lake and possibly from a deeper conduit nearer Goma, was installed a telemetered seismic network of 6 permanent stations. Scientists agree that volcano monitoring and contingency planning are essential for forecasting and responding to future trends.
      267  493
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,
      196  532
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Bollettino Sismico Italiano: settembre - dicembre 2015

    Nel terzo quadrimestre 2015 si sono verificati 5 terremoti con M>4 nel territorio Italiano. In particolare il 14 ed il 16 ottobre si sono verificati due eventi profondi del basso Tirreno il primo con M=4.2 a 300 km di profondità, il secondo con M=4.4 a circa 250 km di profondità. Due terremoti M4.2 e M4.4 sono avvenuti il 6 dicembre nel Mar Adriatico a nord delle Isole Tremiti. Associati a questi si sono verificati alcuni eventi di magnitudo sopra a 3.5: si è trattata di una vera e propria sequenza sismica durata pochi giorni. L’ultimo evento di magnitudo superiore a 4 si è verificato a NE di Palermo nel basso Tirreno il 20 dicembre con una M=4.2. E’ infine da segnalare un terremoto con M = 4.8 che si è verificato il 1 Novembre in Slovenia, al confine con la Croazia.
      256  131
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Bollettino Sismico Italiano: maggio - agosto 2016

    Il 24 agosto 2016 un terremoto di magnitudo 6.0 ha dato inizio ad una sequenza sismica in Italia centrale, che ha generato decine di migliaia di eventi sismici. Per l’analisi e revisione di questa sequenza si rimanda ad un uscita speciale del BSI prevista per fine 2017(S_BSI_CI). In questo quadrimestre e nel successivo gli eventi nella zona della sequenza sono quelli localizzati nella sala di sorveglianza. Solo gli eventi con M>= 3.5, e pochi altri (vedi Marchetti et al. Annals of Geophys. DOI: 10.4401/ag6116) sono stati rivisti dal BSI.Nel secondo quadrimestre 2016 si sono verificati sedici eventi di magnitudo superiore a 4.0 (ML) rivisti dagli analisti del BSI uno vicino alle coste tunisine quindi fuori dal territorio nazionale; l’evento di Mw 4.1 che è avvenuto il 30 maggio in provincia di Terni vicino al Lago di Bolsena (lat=42.7, lon=11.98 ad una profondità di 8 km) e 14 eventi nella zona della sequenza nell’ultima settimana del quadrimestre: il 24 agosto 2016 si è verificato l’evento di magnitudo ML=6.0 (Mw=6.0) che ha iniziato una sequenza sismica per la quale sono stati localizzati decine di migliaia di terremoti e che alla fine di ottobre 2016 ha generato eventi persino più forti (fino a Mw=6.5) della prima scossa.
      336  252
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Analysis and preliminary results of the Mw 4.9, Marradi seismic sequence (September 18th, 2023), in the northern Apennines, carried out by the BSI working group.

    On September 18, 2023, an earthquake with a magnitude of Ml=4.8 (Mw=4.9) occurred a few kilometers SW of Marradi (FI) at a depth of about 8 kilometers. The computed TDMT solution of the mainshock suggests a normal fault oriented NW-SE (Scognamiglio et al., 2006). The earthquake, preceded by a foreshock with a magnitude of Ml=3.3 (Mw=3.4), triggered a seismic sequence characterized, in the first two months, by approximately 700 aftershocks localized by the staff on duty in the Seismic Monitoring Room of the INGV in Rome, including 6 events with a magnitude of Ml≥3.0 occurred in the first two days. The sequence occurred in a high seismic hazard region. The two closest historical earthquakes occurred in the Mugello area about 30 km SW of Marradi (and about 25 km north of Florence): one, whose magnitude (Mw) is estimated to be about 6.0, occurred on June 13, 1542 while the other with estimated magnitude (Mw) of about 6.4 occurred on June 29, 1919. The second one is among the strongest (most significant) Italian earthquakes of the 20th century, and also one of the strongest known to date with its epicentre in the northern Apennines. The affected area was that of Mugello, with extensive damage both in the province of Florence and on the Romagna side of the Apennines. The analysts of the BSI (Italian Seismic Bulletin) reviewed the initial three days of the sequence, paying special attention to the hours directly following the mainshock. The BSI work mainly consists in revising the picking of P and S phases and assigning them appropriate weights, retrieving previously unused phases, and evaluating the maximum amplitudes necessary for calculating the value of Ml. The latter is a critical aspect of the initial phases of a seismic sequence; in fact, the occurrence of events is very close in time, making it challenging to estimate the maximum amplitudes and, consequently, the magnitude automatically. Through this analysis, they have identified an earthquake with a magnitude of Ml=3.4, occurring approximately one minute after the mainshock and overlooked during the surveillance service. Furthermore, a comprehensive effort to recover smaller seismic events not initially analyzed in the Seismic Monitoring Room resulted in the localization of 498 earthquakes, nearly a 30% increase within the first three days. In Figure 1(a-d), hypocentral parameters and time readings of the 352 earthquakes detected in the Seismic Monitoring Room have been compared with those of the same events revised by the BSI. It is evident as both the horizontal and vertical errors, as well the seismic gap associated with the location decrease for the dataset analyzed from the BSI, while the number of P and S phases increases for the same dataset. Subsequently, the events revised from BSI were initially relocated by applying the NonLinLoc code (Lomax et al., 2000) using a 1D regional velocity model from Pastori et al. (2019). Following this, a double-difference technique (Waldhauser and Schaff, 2008) was applied to improve the geometries of the activated structures (see Figure 2). Concomitantly, an analysis using the template matching technique was applied, for the period from September first to October 10th, to identify events overlooked by the Earthworm system in the Seismic Monitoring Room. The results are shown in Figure 3. It was found that the number of detections increased by approximately 60%. Furthermore, the figures 3c and 3d put in evidence as the larger number of new detected earthquakes is characterized by lower magnitude. This result highlights the value of integrating this type of analysis to complement the efforts of the Italian Seismic Bulletin (BSI).
      132  222
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Surface ruptures following the 30 October 2016 Mw 6.5 Norcia earthquake, central Italy

    We present a 1:25,000 scale map of the coseismic surface ruptures following the 30 October 2016 M-w 6.5 Norcia normal-faulting earthquake, central Italy. Detailed rupture mapping is based on almost 11,000 oblique photographs taken from helicopter flights, that has been verified and integrated with field data (>7000 measurements). Thanks to the common efforts of the Open EMERGEO Working Group (130 people, 25 research institutions and universities from Europe), we were able to document a complex surface faulting pattern with a dominant strike of N135 degrees-160 degrees (SW-dipping) and a subordinate strike of N320 degrees-345 degrees (NE-dipping) along about 28km of the active Mt. Vettore-Mt. Bove fault system. Geometric and kinematic characteristics of the rupture were observed and recorded along closely spaced, parallel or subparallel, overlapping or step-like synthetic and antithetic fault splays of the activated fault systems, comprising a total surface rupture length of approximately 46km when all ruptures were considered.
      6034  219
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    The monitoring of seismic activity at Nyiragongo volcano through telemetered seismic network Goma Volcano Observatory (Democratic Republic of the Congo)

    The eruption, in January 2002, of Mount Nyiragongo in eastern Congo, and the humanitarian disaster that followed in its wake, underlined the critical importance of accurate seismology to predict when such events will take place. Thus, a seismic telemeterd network, with centre in Goma Observatory, was built across Virunga area to help the moniotring of Volcano. Mount Nyiragongo is a volcano in the Virunga Mountains associated with the Great Rift Valley. The most prominent feature of the Democratic Republic of Congo's geology is the Western Rift Zone (WRZ), which runs through its eastern border regions and neighbouring countries (e.g. Uganda, Rwanda, Burundi, Tanzania) between 28°E to 32°E and 4°N to 12°S. The WRZ extends over a 1600 km arc, including lakes Albert, Eduard, Kivu and Tanganyika, until it joins the eastern branch. The Western Rift Valley of Africa has experienced severe earthquakes and volcanic eruptions in recent historical times. Earthquakes with magnitude >=6 are not frequent, but may cause significant destruction. They occur mostly in DRC and neighbouring countries (e.g. Uganda and Tanzania). In 1991, IAVCEI selected the Nyiragongo volcano as the ‘African decade volcano’ for the International Decade of Natural Disaster Reduction (IDNDR) program. Nyiragongo is located about 20 km north of Lake Kivu and 15 km north of Goma, a city of about 500,000 inhabitants. Goma is twinned to Gisenyi in Rwanda, which has a population of about 100,000. Several small villages are also located on the flank of the volcano. Population growth and poor or non-existent planning has led to relatively uncontrolled use of land for building, and the development of sites vulnerable to earthquake and/or volcanic risk.
      364  596
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Multi-segment rupture of the 2016 Amatrice-Visso-Norcia seismic sequence (central Italy) constrained by the first high-quality catalog of Early Aftershocks

    We present the first high-quality catalog of early aftershocks of the three mainshocks of the 2016 central Italy Amatrice-Visso-Norcia normal faulting sequence. We located 10,574 manually picked aftershocks with a robust probabilistic, non-linear method achieving a significant improvement in the solution accuracy and magnitude completeness with respect to previous studies. Aftershock distribution and relocated mainshocks give insight into the complex architecture of major causative and subsidiary faults, thus providing crucial constraints on multi-segment rupture models. We document reactivation and kinematic inversion of a WNW-dipping listric structure, referable to the inherited Mts Sibillini Thrust (MST) that controlled segmentation of the causative normal faults. Spatial partitioning of aftershocks evidences that the MST lateral ramp had a dual control on rupture propagation, behaving as a barrier for the Amatrice and Visso mainshocks, and later as an asperity for the Norcia mainshock. We hypothesize that the Visso mainshock re-activated also the deep part of an optimally oriented preexisting thrust. Aftershock patterns reveal that the Amatrice Mw5.4 aftershock and the Norcia mainshock ruptured two distinct antithetic faults 3-4 km apart. Therefore, our results suggest to consider both the MST cross structure and the subsidiary antithetic fault in the finite-fault source modelling of the Norcia earthquake.
      3589  133
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    What we can say (or not) about the seismic sequence of the November 9th 2022, Mw 5.5, earthquake in the Marche offshore: an analysis of the Italian Seismic Bulletin on phase interpretation, velocity models and uncertainties of earthquake locations

    Introduction In November 2022 a seismic sequence occurred in the Marche offshore, about 29 km from the coast and the city of Fano. The sequence started on November 9 (06:07:25 UTC) with a ML=5.7 earthquake (Mw=5.5 from TDMD computation, Scognamiglio et al., 2006), immediately followed by a ML=5.2 earthquake (06:08:29 UTC) located about 8 km to the south. The two mainshocks activated a seismic sequence with about 400 aftershocks lasting the first week, 13 of them with ML>= 3.5 (Fig. 1). Few hours after the occurrence of the mainshock, the BSI (“Bollettino Sismico Italiano”) working group started to manually analyze P and S phase arrival times and seismogram amplitudes of earthquakes with magnitude ML>= 3.5 recorded by the the Italian National Seismic Network (Rete Sismica Nazionale, hereafter RSN) in order to better constrain hypocenter locations previously provided by the seismic surveillance room of the INGV in Rome for rapid communication to the Italian Civil Protection (Dipartimento Protezione Civile, DPC). Later, the BSI working group analyzed the seismicity of the sequence of the first weeks of seismic activity by revising hypocentral parameters of more than 500 events. The 2022 Marche offshore sequence took place along the Adriatic outer front of the northern Apennines in central Italy. Offshore seismic reflection profiles image a shallow thrust-and-fold system striking WNW–ESE to NNW–SSE. Along the coastal Adriatic area, active blind thrusts deform Plio-Quaternary siliciclastic turbidites that are few hundreds of meters to more than 2 km thick in correspondence of ramp anticlines and synclines, respectively. In a recent work, through the analysis of high-quality background seismicity data, De Nardis et al. (2022) identified two lithospheric-scale active thrusts deepening westward under the Adriatic outer front from upper- to lower-crustal depths. These new data support previous thick-skinned interpretations of seismic commercial profiles and CROP03 deep reflection data (Lavecchia et al., 2003). Focal mechanisms of weak to moderate (ML < 4.8) local earthquakes occurred between 2009-2017 at upper- to deep-crustal depths show prevailing reverse and reverse/oblique solutions (De Nardis et al., 2022) and subordinate strike-slip faulting (Mazzoli et al., 2014). The analysis of the 2022 Marche offshore sequence opens again the discussion on the uncertainties related to the hypocenter locations of earthquakes that occur in the Adriatic offshore domain (e.g., Di Stefano et al., 2022) and the limits of our present capability to provide an accurate seismotectonic interpretation of the instrumental seismicity in this region. Actually, the 2022 sequence area is only covered on land by RSN, with the closest seismic station located at about 28 km from the epicentral location of the mainshock. The particular geometry of the network along the Italian coast makes it difficult to correctly constrain hypocenter locations compared with other regions of Italy. Taking into account this configuration, although the INGV is able to obtain coherent earthquake information for Civil Protection purposes into the limits of the communication threshold, we note that data provided by the seismic surveillance room in terms of both seismic phase readings of arrival times for hypocenter location and waveform amplitudes for magnitude computation need to a more accurate analysis if the main goal is the correct reconstruction of the active structures involved in the sequence. This analysis should include a) a careful revision of the arrival time pickings to reduce the errors due to seismic phase misinterpretations, b) an accurate study to constrain earthquake locations with appropriate velocity models, and c) the hypocenter solution assessment through adequate tests that define which information can be inferred from earthquake location results. Data analysis and phases interpretation Through the interpretation of the seismic records, the BSI analysts have identified refracted first arrivals of P and S phases at epicentral distances of about 60 km, smaller than those expected for Pn/Sn refracted phases at the Moho discontinuity (e.g., Di Stefano and Ciaccio, 2014) whose arrivals should be observed at distances of about 90-100 km in this area. Since possible systematic misinterpretation of P and S arrivals can strongly affect the correct hypocenter locations, we have carefully revised the phase pickings provided by the INGV surveillance room by discriminating direct from refracted phases at stations located at distances greater than 60 km. This is mainly important for interpretation of weak S refracted phases that are often hidden into the arrivals after the P phase. We have taken into account these characteristics in the earthquake location process by only using clear direct/refracted S phases in our inversion procedure. The comparison of the ML>= 3.5 hypocenter locations performed by the BSI and the INGV surveillance room (Figs. 1 and 2) shows how an accurate analysis of the pickings is necessary to obtain robust earthquake locations for seismotectonic interpretation: even using the same hypocenter location code and velocity model, we observe that the mislocation of the hypocenters in this area can range from few to about 10 kilometers (Fig. 1) while the formal errors are strongly reduced after the BSI picking revision (Fig. 2) The velocity model issue Events location in the Adriatic Sea suffers from the lack of a specific velocity model for the seismic sequence area. The use of inadequate velocity parameters during the location process can introduce systematic errors, which may result in incorrect seismotectonic interpretations. We therefore built and tested different velocity models from both available geophysical data and our inversion of the velocity structure using the arrival time readings revised by the BSI working group. In order to define deterministic 1D models suitable for earthquake location (Vp and Vp/Vs), we integrated sonic logs from local deep wells (ViDEPI Project, 2005) with literature data that include: seismic commercial profiles, deep seismic refraction surveys, the CROP03 crustal profile, Receiver Function and regional seismic tomography models, Vp/Vs reference values for mid- and lower-crustal crystalline rocks (Coward et al., 1999; Ponziani et al., 1995; Lavecchia et al., 2003; Spada et al., 2013; Di Stefano et al., 2009, Christiansen and Mooney, 1993). In order to obtain the velocity structure from our revised dataset, we first determined the Vp/Vs ratio by using the arrival time pickings of selected P and S phases. The mean velocity ratio Vp/Vs was computed through the cumulative Wadati diagram. Then, by collecting all the a priori available information regarding the structure of Adriatic Sea (velocities, layer thicknesses and Moho depth), we applied the VELEST software (Kissling, 1995) to compute a new 1D velocity model for earthquake location. Conclusions In this work we present our first analyses of the sequence and the accurate study of the velocity models that we obtained from both a revision of available data and the inversion of arrival time pickings analyzed by the BSI analists. Moreover, we will discuss our preliminary earthquake locations with a particular attention to resolution analysis and hypocenter location assessment.
      187  194