Skip to main content
The search returned 4 results
Now showing 1 - 4 of 4
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Cos’è successo a Siena il 26 maggio 1798 ? Un’iniziativa interdisciplinare per la valutazione del possibile impatto di un futuro «massimo sismico» su una città-monumento

    L’importanza di un terremoto non dipende solo dalla sua intensità epicentrale. Quello del 26 maggio 1798 (Io VII MCS secondo CPTI04) non si può dire una catastrofe ma è di certo un evento «strategico». Si tratta, infatti, del massimo terremoto storico conosciuto per Siena, che è una delle maggiori attrazioni turistiche e quindi uno dei luoghi più frequentati di questo paese. Nell’ultimo ventennio il terremoto del 1798 è stato più volte studiato, sia da sismologi storici nell’ambito delle attività di revisione del catalogo PFG promosse dal GNDT e dall’ING/INGV (Castelli e Camassi, 1995; Castelli et al., 1996; Boschi et al., 1997; Boschi et al., 2000), sia da storici dell’architettura (Gennari, 2005). Siamo ancora lontani dall’aver completamente esplorato la copiosissima documentazione storica potenzialmente utile per una ricostruzione degli effetti di questo terremoto nel centro urbano senese. Tuttavia il campione reso disponibile dagli studi fatti finora è abbastanza significativo da rendere possibile l’avvio di un progetto di microzonazione del centro storico senese e di una serie di indagini miranti a comprendere cosa realmente successe a Siena il 26 maggio 1798 e, per conseguenza, quali effetti ci si possa attendere in occasione di un futuro terremoto di analoga portata. Il centro storico senese ha infatti conservato, almeno nelle grandi linee, una fisionomia molto simile a quella che aveva del 1798 e questa circostanza offre l’opportunità di attualizzare l’esperienza del terremoto del 1798 contribuendo alla identificazione delle eventuali criticità attese in caso di terremoti futuri. Si è perciò creato un gruppo di studio interdisciplinare (geofisica, architettura, sismologia storica, ingegneria sismica, geologia, ecc.) che ha cominciato a predisporre gli elementi necessari per questa ricostruzione. La base di dati storici di cui si dispone comprende descrizioni di danno più o meno dettagliate per circa seicento edifici senesi, su un migliaio da cui era composto il centro urbano nel 1798. Questo campione comprende sia edifici monumentali o comunque di vaste proporzioni (palazzi gentilizi e case di abitazione multipla, chiese, conventi, opifici) sia edifici non monumentali. Il nostro primo scopo è una ricostruzione dettagliata della distribuzione del danno del terremoto del 1798 nell’area urbana. Utilizzando cartografia storica pressoché coeva al terremoto (cfr. Gennari, 2005) e grazie all’impiego di un GIS, è stato possibile trasporre le informazioni storiche sottoforma di carte tematiche (Danno, Vulnerabilità, Interventi richiesti, eccetera). Le Figg. 1 e 2 presentano due esempi di tematismi derivati da dati archivistici. In parallelo a questa analisi verrà svolta una indagine a campione su una ventina di edifici rappresentativi per i quali si eseguiranno stime di comportamento dinamico con la tecnica del tremore sismico ambientale. A completamento della caratterizzazione della risposta sismica dei terreni nell’area del centro storico saranno svolte analisi geologiche e sismiche per definire le aree in cui l’assetto del sottosuolo rende ipotizzabili fenomeni di amplificazione del moto sismico del suolo. Tutti i risultati verranno raccolti in una base dati comune e implementati nel GIS (Figura 2) L’analisi congiunta dei dati di danno (opportunamente interpretati in termini di risposta sismica locale utilizzando il metodo proposto da Goretti e Dolce, 2004; Goretti, 2006) e delle analisi geofisiche e geologiche permetterà di individuare quelle parti del patrimonio edilizio storico più esposte a danno in caso di futuri eventi sismici.
      533  203
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Gis-based identification of topographic sites in Italy with significant ground motion amplification effects

    (2010-05-24) ; ; ;
    Pessina, Vera; Istituto Nazionale di Geofisica e Vulcanologia, Sezione Milano-Pavia, Milano, Italia
    ;
    Fiorini, Emilia; Eucentre, Pavia
    Surface topography can significantly affect earthquake ground motions, as suggested by many examples of unexpected damage suffered by buildings located on the top of hills, on ridges or along slopes. European and Italian seismic codes suggest topographic aggravation factors in the 1 – 1.4 range to be applied to seismic actions, depending not only on simple morphologic parameters (average slope angle, width and height of the relief) but also on the type of relief (isolated cliff or ridge) and on the location of the site relative to the relief. Furthermore, strongly irregular topographies should be dealt with by a specific study. To provide a practical tool for the identification of critical topographic sites, analyses of high resolution digital elevation models (DEM), with the support of Geographic Information Systems (GIS), are presented in this paper. Simple GIS functions are used to classify critical ranges of inclination, while the identification of valleys and ridges requires more complex procedures. A comparison of different methods for their identification is presented in this work, aiming at finding the most suitable ones for seismic microzonation analyses. Once the critical conditions are synthesized into GIS layers, their proximity to inhabited centres or strategic structures are checked. The resulting maps can be used for topography-related seismic risk assessment at large scale. We present two examples of application of this procedure, with particular attention to the small historical centres located on the Apennine mountains in Central and Southern Italy.
      221  895
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Deliverable D19: Influence of alluvium filled basins and edge effects on displacement response spectra

    Several cases of strong motion data recorded in alluvial basins show very high amplification effects that exceed, at medium and long periods, those predicted by empirical relations or included in standard reference codes. Among others, we recall here the earthquakes of San Fernando (1972), Northridge (1994) (BSSA, 1996) and the Umbria-Marche sequence of 1997, during which the shaking recorded in the Gubbio Plain (Pacor et al, 2007) provided strong evidence of the phenomenon: extremely high spectral amplification values (higher than reference codes) for 2 < T < 4 s (see Fig. 4). The main reason why these amplifications (“basin effects”) take place lies in the generation, by diffraction at the edges of the valley, of long period surface waves that travel horizontally in the upper sediments of the valley. While the influence of alluvium filled basins on site response has been the subject of substantial research, the resulting modifications on the response spectra at the basin surface (especially for T > 1 - 2 s) has not been as thoroughly investigated (see e. g. Chávez e Faccioli, 2000) despite its importance in structural design. Significant previous studies tried to estimate basin amplification effects through the analysis of strong-motion data and most of them quantified basin geometry only in terms of sediment depth (Trifunac and Lee, 1978), introducing such term in newly developed attenuation models (Campbell, 1997; Field, 2000; Lee and Anderson, 2000). Other studies tried to relate basin effects also to the relative location of source and site position in the basin (Choi et al., 2005), or to the distance to the basin edge (Joyner, 2000). In the S5 project, specific parametric studies involved two different types of basins (both typical of the Italian Peninsula): “enclosed” basins and “open” basins. Results gave great insight of how basin effects amplify seismic motion in connection with the geometry of the basin, with the fault mechanism and with the different valley-fault configurations. Critical in all analyses is the value of the fundamental 1D vibration period of valley centre, T01D, that acts as the theoretical upper limit to 2D basin amplification effects, as stated in Chàvez-García and Faccioli (2000). Its calculation appears thus crucial in the study of the seismic response of valleys and basins. In addition, a detailed study has been devoted to the identification and classification of alluvium filled basins in Italy, and particularly to the parameters that the previous analyses highlighted as the most critical ones in the modification of response spectra.
      178  519
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Prediction of Ground Motion and Loss Scenarios for Selected Infrastructues Systems in European Urban Environments

    computational tools needed for developing scenarios of earthquake ground motions and of ensuing damage to representative urban Infrastructure Systems (IS), as well as with illustrative examples of application to cities in Europe and neighbouring countries. The material illustrated is the outcome of the work carried out in LESSLOSS Sub-Project SP11, devoted to the title subject. Of main concern are the water and natural gas distribution networks and the sewage networks, because these are, with the transportation network, by far the most extensive IS in cities and, especially the first one, often the most vulnerable. Also, emphasis is placed more on the tools for achieving a scenario and on their application, rather than on the economic loss evaluation. As a partial justification of the belated development and interest in seismic IS damage, it is recalled that destructive earthquakes of recent decades in Europe did not cause large scale damage to IS. In addition to describing tools for the practical construction of damage scenarios for IS, the report also highlights some innovative research trends in the field, especially the methods leading to the estimation of pipeline damage on the basis of the peak ground strains generated by the propagation of seismic waves, which in turn needs the support of advanced 2D or 3D wave propagation modelling. The main sections of the report are devoted to: - Calculation of seismic ground motions in an area, both of advanced and simplified engineering level, with applications for Thessaloniki and Düzce (Sect 2); - Outline of the buried pipelines response during earthquakes, illustrating the chief elements at play on the side of the seismic loading effects and typical damage (Sect. 3); - Vulnerability representations for IS components, mostly those consisting of buried pipelines (Sect. 4); - Typical features of IS inventories, with examples (Sect 5); - Damage evaluation tools at urban scenario and single pipeline level (Sect. 6); - Damage scenario applications for Thessaloniki and Düzce (Sect 7); - Conclusions.
      295  1360