Skip to main content
The search returned 34 results
Now showing 1 - 10 of 34
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    A second order finite-difference ghost-point method for elasticity problems on unbounded domains with applications to volcanology

    (2014) ; ; ; ;
    Coco, A.; Bristol University
    We propose a novel nite-di erence approach for the numerical solution of linear elasticity problems in arbitrary unbounded domains. The method is an extension of a recently proposed ghost-point method for the Poisson equation on bounded domains with arbitrary boundary conditions (Coco, Russo, JCP, 2013) to the case of the Cauchy-Navier equations on unbounded domains. The technique is based on a smooth coordinate transformation, which maps an unbounded domain into a unit square. Arbitrary geometries are de ned by suitable level-set functions. The equations are discretized by classical ninepoint stencil on interior points, while boundary conditions and high order reconstructions are used to de ne the eld variable at ghost-point, which are grid nodes external to the domain with a neighbor inside the domain. The approach is then adopted to solve elasticity problems applied to volcanology for computing the displacement caused by an underground pressure source. The method is suitable to treat problems in which the geometry of the source often changes (explore the e ects of di erent scenarios, or solve inverse problems in which the geometry itself is part of the unknown), since it does not require complex re-meshing when the geometry is modi ed. Several numerical tests are performed, which asses the e ectiveness of the present approach. Keywords: Linear Elasticity, Cauchy-Navier equations, ground deformation, unbounded domain, coordinate transformation method, Cartesian grid, Ghost points, Level-set methods
      236  45
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    L’indagine macrosismica: metodologia, parametri del terremoto, questioni aperte

    Subito dopo l’evento del 6 aprile 2009, come di consueto è stata realizzata una lunga e complessa indagine macrosismica, promossa dal gruppo operativo QUEST, che ha avuto inizialmente l’obiettivo di delimitare l’area di danneggiamento, a supporto delle attività di pronto intervento della Protezione Civile, e successivamente quello di classificare nel modo più accurato e capillare possibile, gli effetti prodotti dall’evento, particolarmente nelle aree danneggiate. A questo scopo è stata prodotta una stima utilizzando la scala MCS (Sieberg, 1930); in un secondo momento è stata rifinita l’indagine per una cinquantina di località dell’area maggiormente danneggiata (Is MCS>VII), raccogliendo ed elaborando i dati in termini di scala macrosismica EMS98 (Grünthal, 1998). Per la complessità e la dimensione dei problemi affrontati, questo terremoto ha costituito un banco di prova di grande importanza per la macrosismologia italiana. In questo testo viene descritto il lavoro realizzato, discutendo in particolare alcuni aspetti che hanno messo alla prova le metodologie di indagine tradizionali (sistematiche irregolarità degli insediamenti monitorati, forti divergenze degli scenari di danno rispetto a quelli previsti dalle scale, difficile comparabilità con scenari storici, ecc.) e presentandone i risultati, in relazione ai parametri epicentrali che ne risultano e il loro contributo più diretto alla comprensione complessiva della sismicità dell’area.
      1750  603
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    Geological record of tsunami inundations in Pantano Morghella (south-eastern Sicily) both from near and far-field sources

    Analysis of tsunami deposits from the Pantano Morghella area provided geological evidence for two inundations occurred along the south-eastern Ionian coast of Sicily. Pantano Morghella is a large pond characterised by a finegrained sedimentation indicating a low-energy depositional environment. Two anomalous yellow sandy layers found at different depths indicate the occurrence of high-energy marine inundations. We studied sedimentological and paleontological features of the anomalous deposits as well as their spatial distribution observing the following properties: different facies with respect to the local stratigraphic sequence; erosive bases, rip-up clasts and broken elements testifying violent deposition mechanisms; macro and micro fauna of marine environment; relatively constant thickness throughout most of the depositional zone with thinning at the distal end; large sand sheets that extend inland. These observations, jointly with their infrequency in the sedimentary record and the age indicating a fast deposition, provided strong evidence for tsunami inundations. Correlations between anomalous layers and historical tsunamis are supported by radiocarbon and OSL dating results. The younger deposit is likely due to the 1908 near-source tsunami, whereas the flooding of the oldest event is most likely associated with a far and large source, the Crete 365AD earthquake.
      334  371
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Open Access ,

    A semi-quantitative method to combine tectonic stress indicators: example from the Southern Calabrian Arc (Italy)

    Databases of tectonic stress indicators are commonly based on different types of observations at different spatial and temporal scales. Each single indicator can be variously representative of the real stress field and the relative importance of all the indicators should be accounted for before any following elaboration. We propose a semi-quantitative procedure which assigns weights to each indicator on the basis of its quality and its representative volume. In this way the indicators can be reliably combined to produce, for example, stress field maps or stress trajectories. The proposed weighting criterion has been applied to a dataset of 440 crustal stress indicators specifically compiled, gathering focal mechanisms and geological data from the literature, and original data from structural features derived from devoted fieldwork, for the southern part of the Calabrian Arc (Italy). This area represents an interesting case study because of its complex geodynamic and structural arrangement. Data were ranked and the orientation of the minimum horizontal stress (Sh) has been interpolated and smoothed on a regular grid. We drew maps of the principal stress axes and inferred the stress regimes over the investigated area. Results are in agreement with independent information from the literature and display the non-uniform orientation of the tectonic stresses and the occurrence of perturbations both at regional and local scale.
      142  89
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Active thrusting as a possible seismogenic source in Sicily (Southern Italy): Some insights from integrated structural–kinematic and seismological data

    This paper proposes a new seismogenic interpretation of mainland and central-southern Sicily, based on an integrated structural–kinematic–seismological approach. Through analysis of available structural and geophysical data, the tectonic setting, the major kinematic units and the crust geometry of the Sicilian southward-verging fold-and-thrust belt system are schematized in sections and in map form. The depth-contour lines of the outermost basal thrust plane, which dates back to Plio-Pleistocene times with some evidence of Holocene activity, are reconstructed. This plane, here named Sicilian Basal Thrust (SBT), emerges along the southward convex Sciacca–Gela–Catania front and reaches the base of the crust at a depth of about 30 km beneath northern Sicily. Additionally, an important regional upper crust splay, with the same arched shape, has been identified some kilometres northward. In order to detect any possible indication of seismogenic activity linked to ongoing deformation of the SBT and its splay, we analyzed the distribution and kinematics of the instrumental seismicity in the period between 1981 and 2006. Particular attention was given to the background seismicity (Ml up to 4.6) located beneath the sedimentary cover at Mt. Etna, as it allows individuating a northward deepening seismogenic volume undergoing an average N–S compression, which corresponds well with the SBT geometry in section view. A merged dataset of all the known major historical and instrumental events (moment magnitude ≥ 4.5) that occurred above the SBT 0-to-30 km depth-contour lines from 217 B.C. to 2006 was compiled and analyzed. Based on information from instrumental data and/or on speculations on the shape and extent of the historical earthquake macroseismic fields, two major ranges of hypocentral depths have been schematically identified within the merged dataset: an upper crust range (in average b~ 10 km) and a mid-to-lower crust range. Focal mechanisms available in the literature show prevailing reverse and reverse-oblique kinematics, compatible with a nearly average N–S shortening and with some field evidence of active fold-and- thrust deformation at the SBT front and along its inner splay. Several moderate earthquakes (nearly 40 in the last 400 years with moment magnitude ranging from 4.5 to 5.5) and a few more energetic events with moment magnitude up to ~ 6.0, such as the Mineo 1624, the Belice 1968 and the Catania 1818 events, can be attributed to an ongoing activity of the SBT. In previous studies, these events had been often attributed to isolated N–S strike-slip sources located within the Hyblean-Pelagian foreland, while all the interposed areas had been considered aseismic, as well as the SBT had been considered inactive. The identification in the SBT of a unique regional-scale seismogenic structure capable to connect the active deformation and the seismic activity of the western, central and eastern areas of mainland Sicily and those of central-southern Sicily evidently has strong implications in terms of seismic hazard assessment. In fact, it allows the definition of a new homogeneous compressional seismotectonic province, which extends between the SBT surface front line and the surface projection of the 25 km SBT depth-contour line. A subdivision in two sub-provinces, a shallow one above the 0–10 km SBT segment and a deep one above the 10-to-25 km SBT segment, is also considered and the energy released of the associate earthquakes evaluated. To conclude, the proposed model is discussed in comparison with other models from the literature and some important open problems are put forwards.
      248  55
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Cooling history of a dike as revealed by mineral chemistry: A case study from Mt. Etna volcano

    Seven rock samples were systematically collected from innermost to the outermost portion of a dike outcropping at Mt. Etna volcano. Results show that, from dike core-to-rim, plagioclase, clinopyroxene and titanomagnetite show compositional variations due to increasing cooling rate. Plagioclase is progressively enriched in An from innermost to the outermost part of the dike. Similarly, clinopyroxene components En+ CaTs+CaFeTs increase, whereas Di+Hd decrease. The Usp content in titanomagnetite also systematically decrease from dike core-to-rim. Partition coefficients and thermometers based on the crystal-liquid exchange reaction indicate that, due to rapid cooling rates at the dike outer portions, early-formed crystal nuclei do not re-equilibrate with the melt. The chemistry of minerals progressively deviates from that of equilibrium; consequently, from dike core-to-rim, mineral compositions resemble those of high-temperature formation. The chemical variations of clinopyroxene and plagioclase in dike samples mirror those obtained from cooling experiments carried out on alkaline basalts. Accordingly, we used an experimental equation based on clinopyroxene compositional variation as a function of cooling rate to determine the cooling conditions experienced by the crystals during dike emplacement. The estimated cooling rates are comparable to those predicted by thermal modeling based on an explicit finite-difference scheme.
      236  29
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,
      144  20
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Movements of the Sciara del Fuoco

    The Sciara del Fuoco (SdF) landslides that occurred at the end of December 2002 prompted researchers to install geodetic networks to monitor deformations related to potential new slope failures. With this aim, an integrated multiparametric monitoring system was designed and deployed. In particular, this complex monitoring system is composed of four single systems: an electronic distance measurement network, installed immediately after the landslide events, a realtime GPS network, a ground-based interferometric linear synthetic aperture radar (GB-InSAR), and an automated topographic monitoring system (named Theodolite Robotic Observatory of Stromboli, or THEODOROS); the three last systems provided a continuous monitoring of selected points or sectors of the SdF. Data acquired from different systems have been jointly analyzed to reach a better understanding of the SdF dynamics. Displacement data obtained from the topographic systems are compared with those obtained from GB-InSAR, and the results of the comparison are analyzed and discussed. Furthermore, in this chapter, an example of a warning system that can detect slope instability precursors on the SdF based on a statistical analysis of the data collected by the THEODOROS system is reported.
      156  19
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Foreland seismicity associated to strike-slip faulting (SE Sicily, Italy): seismotectonic implications and seismic hazard assessment

    Between February 6 and 12, 2016, an earthquake sequence affected the western sector of the Hyblean foreland domain in SE Sicily (Italy), a region characterized by several disastrous events, as the seismic history describes, of which little is still known about the seismogenic sources. Despite the low magnitude of most events (MLmax 4.3), the sequence represents one of the largest episodes of seismic strain release in the area over the last 30 years since the December 13, 1990 earthquake (ML = 5.4). Accurate seismic phase arrival times related to the seismic sequence were obtained by using a wave-correlation method which enabled a significant improvement in precision of earthquake locations, allowing to detect a N-S striking rupture area about 8 km deep. The N-S trending discontinuity well matches, in the near-surface, with the observed geological structures, in rather good agreement with the computed focal solutions which evidence a roughly N-S elongated structure characterized by a left-lateral kinematics. The detailed knowledge learned on the geometry of the fault surface activated by the seismic sequence, together with the characterization of earthquake source parameters, gave important constraints for a realistic estimation of seismic ground motion throughout stochastic simulations. The modeling technique was based on the comparison between instrumental signals of the strongest event of the sequence and the associated synthetic ones. This permitted to properly define the set of input parameters for the construction of a realistic scenario for a MW 6.1 earthquake, which provides the largest contribution to the seismic hazard for the investigated area.
      777  6
  • Some of the metrics are blocked by your 
    Item type:Publication, Access status: Restricted ,

    Awareness on Seismic Risk: How can Augmented Reality help?

    To communicate the importance of knowing the risk of non-structural damage caused by earthquakes, we developed applications based on Augmented Reality (AR) features. These applications run on mobile devices, such as tablets and smartphones, by using their video camera and other on-board sensors, such as GPS, accelerometer, and gyrocompass, from which AR users do take advantage. Combined with a specifically designed exhibit, our AR applications can contribute to increase the common awareness on seismic risk, providing useful information on how to have safer homes in case of an earthquake. Building codes do not take into account non-structural elements, leaving communities at risk of injuries, blocking escapes and even causing deaths. In this framework, the personal preparedness is of paramount importance. The development of our AR applications is supported by the European project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements).
      112  11